Search results for 'jack handle all steel 1 o'

Maximum Search query length is 25. Your query was cut.

Relevance
Set Ascending Direction

Grid List

10 per page

Items 11 to 20 of 176 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Jack Handle - Pan Jack, Toe Jack, Zwicky / Kenhi Jack Handle - Pan Jack, Toe Jack, Zwicky / Kenhi

    Jack Handle - Pan Jack, Toe Jack, Zwicky / Kenhi

    £71.43
    Jack Handle - Pan Jack, Toe Jack, Zwicky / Kenhi
  2. Slewing Jack. Stumec, 5T on Shoe. 7T on Head Hydraulic

    Slewing Jack. Stumec, 5T on Shoe. 7T on Head Hydraulic

    This versatile jack is designed, by means of a removable slewing shoe, for slewing, aligning and lifting railway tracks, points and crossings. The jack is obstructionless to prevent traffic interruption, will slew up to 50mm, and is fitted with an overload safety valve. Lifting Capacity 5t - shoe, 7t - head Lift on Shoe 160mm Lift per pump stroke 4mm - shoe Weight of Jack 24.5kg Weight of Shoe 3.5kg Weight of Standard Lever 2.2kg
  3. Pan Jack. Zwicky / Kenhi 10T SWL 1054 Hydraulic

    Pan Jack. Zwicky / Kenhi 10T SWL 1054 Hydraulic

    This obstructionless jack is fitted with an overload safety valve and tested to 25% over the rated capacity. The jack is placed under the rail without removal of ballast. Despite its low height of 95mm the jack is capable of a 101mm lift due to its hydraulic telescopic ram. Weight 16.5kg Safe Working Load 10t Closed Height 95mm Stroke Length 101mm n Item code: 09 002 SWL: 10t on head Closed height: 95mm Extended height: 196mm Lifting stroke: 101mm Weight of standard lever: 3.2kg Weight of insulated lever: 2.5kg Weight: 16.5kg
  4. Toe Jack. Zwicky / Kenhi 1527 Hydraulic Jack. 20T on Head, 15T on Toe

    Toe Jack. Zwicky / Kenhi 1527 Hydraulic Jack. 20T on Head, 15T on Toe

    Supplied with an overload safety valve and tested to 25% over the rated capacity. Designed for use on switches and crossings, this heavy duty jack is obstructionless for rails 42kg/m and over. Safe working load: 20t - head, 15t - toe Closed height: 343mm - head, 191mm - toe Toe to head: 152mm Lifting stroke: 110mm Weight: 36kg
  5. PAVING MAUL, HARDWOOD HANDLE, RUBBER HEAD

    PAVING MAUL, HARDWOOD HANDLE, RUBBER HEAD

    £39.95
    PAVING MAUL, HARDWOOD HANDLE, RUBBER HEAD
  6.  28mm x 450mm Hexagon Breaker Point Steel

    28mm x 450mm Hexagon Breaker Point Steel

    £18.00

    28mm x 450mm Hexagon Breaker Point Steel to suit BOSCH GSH2Y and GSH16-28 Breakers. 

  7. Stainless Steel Nut, Bolt and Washer For Speed Boards

    Stainless Steel Nut, Bolt and Washer For Speed Boards

    £1.95
    • Stainless Steel Nut, Bolt and Washer For Speed Boards
  8. Hickory Handle Keying Hammer - 10LB Hickory Handle Keying Hammer - 10LB

    Hickory Handle Keying Hammer - 10LB

    £32.38
    • Keying Hammer Head - 10lb / 4.5kg
    • Hickory Handle
    • Overall Length - Approximately 91.5cm
  9. POT DOLLY, ALL STEEL, HEXAGON, 19MM HEX FOR WOODEN SLEEPERS POT DOLLY, ALL STEEL, HEXAGON, 19MM HEX FOR WOODEN SLEEPERS

    POT DOLLY, ALL STEEL, HEXAGON, 19MM HEX FOR WOODEN SLEEPERS

    £59.95
    All Steel Pot Dolly Hexagon 19mm
  10. PANDROL TYPE INSTALLER FASTCLIP FC-FE & VIPA OVER THE RAIL TOOL INSTALLER FASTCLIP FC-FE & VIPA OVER THE RAIL TOOL

    PANDROL TYPE INSTALLER FASTCLIP FC-FE & VIPA OVER THE RAIL TOOL

    £372.50
    Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.
Relevance
Set Ascending Direction

Grid List

10 per page

Items 11 to 20 of 176 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5