Search results for 'insulated concrete sleepe'
Maximum Search query length is 25. Your query was cut.
-
Steel Sleeper Tongs
£87.49- Tongs used for the safe manual handling and moving of Steel Sleepers.
- Built to be both durable and robust, they allow the rail worker to use them to re-position and remove steel sleepers as required.
-
Timber Nips
£51.11- Timber Nips used for the safe manual handling and movement of Timber Sleepers.
- A durable and robust tool
-
PANDROL TYPE SLEEPER LIFTER, SUITABLE FOR FC & FE, STEL
£175.00Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool. -
Small Pad Scraper
£25.62Designed for use to facilitate the removal of old insulating pads from rail and sleepers. -
Large Pad Scraper
£28.26Designed for use to facilitate the removal of old insulating pads from rail and sleepers. -
-
Sleeper Drill Auger Bit - Maxim 10MM X 240MM
£12.95MAX10 - 10mm x 240mm to suit Maxim Auger Attachment
-
Sleeper Drill Auger Bits - Cembre (Compatible) CEM10
£11.95Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill -
Sleeper Drill Auger Bits - Bance
£24.49Sleeper Drill Auger Bits - Bance:
BAN10 - 10mm x 225mm to suit Bance Auger Attachment
BAN16 - 16mm x 225mm to suit Bance Auger Attachment
BAN19 - 19mm x 225mm to suit Bance Auger Attachment -
Sleeper Drill Auger Bits - Geismar
£9.95Sleeper Drill Auger Bits - Geismar:
GEIS10 - 10mm x 290mm Geismar Type
GEIS16 - 16mm x 290mm Geismar Type
GEIS19 - 19mm x 290mm Geismar Type- Out of stock
- Add to Wishlist
- | Add to Compare