Search results for 'pu palm coated gloves lar'
Maximum Search query length is 25. Your query was cut.
-
Track Magnet
Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.
- Out of stock
- Add to Wishlist
- | Add to Compare
-
WD-40 Value Pack (5 Litre) with Spray Bottle
£51.95A multi-purpose product which actively displaces water leaving an electrically non-conductive barrier
Penetrates rust and corrosion by capillary action, loosening rusted parts
Protects metal against rust and corrosion
Cleans away grease and grime
Leaves a protective film of lubricant
5 Litre Plastican with Spray Bottle -
Grease EP2 Lithium Cartridge Multi Purpose 400g
£2.99Grease EP2 Lithium Cartridge Multi Purpose 400g -
40W RECHARGEABLE CORDLESS LED Work Light - 4000 Lumens
£123.13- Power ; 40W - 4000 Lumens
- Bulb Type ; 16 X 3W Bridgelex LED
- LED Life ; 50000H
- Battery Type ; 7.4V / 13200mAh Rechargeable Li-Ion Battery
- Runtime ; 4 Hours (High Output Mode, 8 Hours Low Output Mode)
- Charging Time ; 4 - 5 Hours
- Input Voltage AC : 100-240V , DC ; 12 - 24V
- Interface ; USB Interface For Charging Devices
- Magnetic ; 4 PCS Strong N40 Magnetic Base
- Dimensions; 160 x 139 x 31MM
- Material ; Aluminium
- 4 Modes ; 100% - 50% - Sos - Flashing
- 4 Power Indicator Lights ;
- All four lights on 100 - 75%
- Red, Yellow And Green Lights On 75 - 50%
- Red And Yellow Lights On 50 - 25%
- Red Light On 25 - 5%
- Red Light Flashing <5%
-
STEL Battery Powered Rail Drill
- Fuel and Fume Free Creating An Eco Friendly Drilling System
- Supplied With A Robust Carry Case, 59 Minute Fast Charger, Jigs, Pump Bottle, 2 x M18 Volt Fuel 9Ah Milwaukee Li-ion Batteries as Standard, LED Battery Status Indicators (optional in car charger available)
- Low Vibration (1.69 m/s2)
- Low Noise Level (82.5 dBA)
- Light Weight; 16.6Kg Including Battery and Handle
- Tool Free Detachable Handle for Left or Right Hand Operation
- Quick Tool Free Cutter Change
- Ergonomically Friendly Slim Profile For Easy Carrying
- Compatible With Most Popular Rail Shoes / Templates
- Brand - Steltools.co.uk
- Out of stock
- Add to Wishlist
- | Add to Compare
-
PANDROL TYPE PAN PULLER, STEL, TYPE C FOR PR & E CLIPS & 4 SHOULDER BASEPLATES 0039/042748
£115.00Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary. -
WS3-10 Pacific Watersafe Cut Level 5 Glove Size 10 Extra Large
£6.99WS3-10 Pacific Watersafe Cut Level 5 Glove
- Size 10
- Extra Large
- 13 gauge, green, Azura and polyester liner
- Dual latex coating
- Waterproof to the wrist
- Superb wet or dry suction grip
- Knit wrist
-
WS3-9 Pacific Watersafe Cut Level 5 Glove Size 9 Large
£3.99WS3-9 Pacific Watersafe Cut Level 5 Glove Size 9 Large -
-
Unilight Head Torch IP67 200 Lumens 6 Hour Run Time
£19.13Unilite Head Torch IP67 200 Lumens: 160 Lumen White CREE® LED • 200 Lumen Boost feature • 3 main functions - BOOST / HIGH / LOW • 1 auxiliary function - HIGH • Easy push button micro switch • Ultra-smooth reflector • 45° rotational head • IPX6 water resistant • • Fully adjustable non-slip silicone headband