Insulated Hydraclaw Jack Handle
Insulated to BS8020

Insulated Hydramite Jack Handle
Insulated to BS8020

Insulated Simplex A17 Jack Handle
Insulated to BS8020

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

The VSR is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

The Vortok Fastclip Stressing Roller is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.

• Phoenix Extra Thin Inox Cutting Discs
• Quantity: 10
• Standards: EN 12413
• Extremely fast cutting with minimum effort required
• Safer & easier for operators to use
• Precision cutting to the millimetre
• Iron, sulphur & chlorine free
• Less burring than with a standard disc
• Diameter: 115 mm (4½")
• Hole Size: 22.0 mm
• Thickness: 1.0 mm

FORCE Power Spray & Fluid
Quantity: 1
High specification maintenance spray
Silicone free for body shop use

Screen Wash
Quantity: 1
Ready Mixed
Size: 5 Litre Plastican

Safety Data Sheet -