6000 Lumens li 6000 Lumens light output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available) ght output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available)

The key features of this range include: 1) Construction: Cast metal case with rubberised feet so the product doesn't "walk" when operated. 2) Performance: Experience the unparalleled speed and efficiency of powerful motors that seamlessly inflate tyres in astonishingly swift times (varies by product). Or quickly top off (35-40 PSI) low tires in seconds. 3) Accuracy: An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy 4) Emergency: An ultra-bright 60 lumen LED flashlight with 6 light modes, including SOS emergency modes. 5) Interface: A digital display allows accurate pressure settings, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. ULTRAFAST INFLATION — Experience the unparalleled speed and efficiency of a 280-watt motor seamlessly inflating tyres from 0 to 40 PSI in an astonishingly swift 2.5 minutes. Or quickly top-off low tyres (35-40 PSI) in less than 25 seconds. RUN LONGER — Its superior duty cycle simply does more work than comparable tyre inflators by allowing continuous operation for 15 minutes. Coupled with its fast inflation, it can fully inflate five tyres from 0-40 PSI in one duty cycle. SMART PRESSURE — An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy. INTUITIVE INTERFACE — A digital display allows accurate pressure settings from 15 to 100 PSI, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. WHAT'S IN THE BOX — AIR20 20-Amp Tyre Inflator Air Compressor with 1-Meter Braided Inflation Hose and a 6-Meter Power Cord with Battery Clamps, Multiple Adapters (Presta Valve, Needle, and Inflatable Toy), Microfiber Storage Bag

The key features of this range include: 1) Construction: Cast metal case with rubberised feet so the product doesn't "walk" when operated. 2) Performance: Experience the unparalleled speed and efficiency of powerful motors that seamlessly inflate tyres in astonishingly swift times (varies by product). Or quickly top off (35-40 PSI) low tires in seconds. 3) Accuracy: An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy 4) Emergency: An ultra-bright 60 lumen LED flashlight with 6 light modes, including SOS emergency modes. 5) Interface: A digital display allows accurate pressure settings, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. ULTRAFAST INFLATION — Experience the unparalleled speed and efficiency of a 138-watt motor seamlessly inflating tyres from 0 to 40 PSI in an astonishingly swift 3.8 minutes. Or quickly top-off low tyres (35-40 PSI) in less than 41 seconds. RUN LONGER — Its superior duty cycle simply does more work than comparable tyre inflators by allowing continuous operation for 25 minutes. Coupled with its fast inflation, it can fully inflate six tyres from 0-40 PSI in one duty cycle. SMART PRESSURE — An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy. INTUITIVE INTERFACE — A digital display allows accurate pressure settings from 15 to 60 PSI, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. WHAT'S IN THE BOX — AIR10 10-Amp Tyre Inflator Air Compressor with 1-Meter Braided Inflation Hose and a 3-Meter Power Cord with a 12V Cigarette Lighter Plug, Multiple Adapters (Presta Valve, Needle, and Inflatable Toy), Microfiber Storage Bag

INTRODUCING NOCO AIR15 - The next generation of portable tyre inflator air compressors utilizing advanced motor and airflow design with uncompromising performance for tires up to 33-inches. It runs longer, fills faster, and infinitely better.

PANDROL No. LP7632 Especially for e2001 and e2007clips but NOT for 4-shoulder baseplates. NOTE hook positions for max efficiency: Upper pivot: Clip installation Lower pivot: Clip extraction All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use. Installation Instructions ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER

Product Code: 0039/047851 Previously LP18679 Suitable for extracting FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol baseplate types VIPA-SP & SFC baseplate. Instructions for Extractor AE17385 The Extractor tool acts as a lever against the web of the rail and the toe of the clip. To locate the tool hold at angle away from the rail and move forwards to position the tool between the rail and the shoulder, with the rear clip catching frame towards the operators foot. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handles away until the rear of the clip touches the catching frame, to ensure the clip remains in the shoulder, to locate in the ‘Parked’ position. Care should be taken to maintain the operator’s balance during clip extraction as the handle is pushed away. To remove the clip completely from the shoulder, keep pushing the handle so the frame hinges upwards and the clip is removed from the shoulder.

BS8020 Insulated Fibreglass Pick Shaft. Pultruded fibreglass core with an injection moulded polypropylene outer. BS Standard 3'' x 2'' eye. Tested and made in conformance with BS8020:2011. Tools for live working. This shaft is designed to be a tap on fit, however when fitting a replacement shaft, the eye should be dressed to suit the hammer head by a competent person.

550 lumen white Nichia LED, 6500k ƒ Hard anodized die cast matte aluminium body ƒ Tactical rubberised micro switch operation ƒ 3 light mode settings and 8Hz defence strobe ƒ Flawless smooth reflector for long distance beam ƒ IP67 dust and waterproof - 1m submersible ƒ Impact resistant to 1m ƒ Built-in USB rubberised charging port cover ƒ Battery level and charging indicator LED ƒ 1A USB-C charging - fast 2 hours charge time ƒ High quality USB-C charging cable included ƒ Nylon velcro holster & safety nylon wrist strap

A Network Rail approved compact marker board, to denote a work site within a possession. PADS No; 0020/039499 Powered by 2No “C” cell batteries. Automatic On/Off operation—No keys to use or loose! Size 400mm x 240mm Complies with NWR Group Standard GIRT/7033 Issue 2 Supplied with batteries