350 LUMEN SMD LED DUAL POWER HELMET MOUNTABLE HEADLIGHT WITH LI-ION BATTERY PACK, MICRO-USB LEAD, AAA BATTERY CASE, 3M ADHESIVE HELMET MOUNT 

DATA SHEET

200 LUMEN CREE LED HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT AND 2 x 5mm WHITE LEDs - 3 x AAA ENERGIZER (INC)

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180

Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.

• Graphite cast iron load sheave
• Hand lever made of malleable cast iron or tubular steel model with rubber grip
• Automatically acting load pressure brake
• Free chaining device optional
• Drop forged load and suspension hooks
• Asbestos-free friction discs

Yale Hand Lever Hoists are versatile, portable units for pulling, tensioning, lashing and lifting loads. The operation of the Hand Lever Hoists is easy and safe.
Light weight, robust malleable cast iron model, free chaining, slip clutch, stamped steel - or aluminium housing, low operating effort - in the Yale product range you will always find an optimal hoist for every type of operation.
The brake system of all Yale hand lever hoists are based on the original Yale patent of the British Engineer Thomas A Weston dating back to 1875. All parts of the load brake are made of high quality materials and are protected against corrosion.
The graphite cast iron load sheave for the link chain has precision machined chain pockets for accurate fit and durability of the load chain. The roller chain sprocket is made from heat treated chromium-molybdenum steel with precision machine teeth to ensure smooth chain movement.
Every Yale ratchet lever hoist is factory tested with overload. The units are supplied with a test certificate showing the serial-No. Operating instructions which contain an EC declaration of conformity are also attached to each unit.

EXTRACTOR, FASTCLIP FC, STEL, CREAM/GREEN 0039/047851 Fastclip Extraction Tool F41/G44/EG47 Cat No. 0039/047851 RB/BR/12 Suitable for all steel and concrete sleeper types. The extraction tool is used for side post insulator and clip/toe insulator replacement.

The key features of this range include: 1) Construction: Cast metal case with rubberised feet so the product doesn't "walk" when operated. 2) Performance: Experience the unparalleled speed and efficiency of powerful motors that seamlessly inflate tyres in astonishingly swift times (varies by product). Or quickly top off (35-40 PSI) low tires in seconds. 3) Accuracy: An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy 4) Emergency: An ultra-bright 60 lumen LED flashlight with 6 light modes, including SOS emergency modes. 5) Interface: A digital display allows accurate pressure settings, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. ULTRAFAST INFLATION — Experience the unparalleled speed and efficiency of a 280-watt motor seamlessly inflating tyres from 0 to 40 PSI in an astonishingly swift 2.5 minutes. Or quickly top-off low tyres (35-40 PSI) in less than 25 seconds. RUN LONGER — Its superior duty cycle simply does more work than comparable tyre inflators by allowing continuous operation for 15 minutes. Coupled with its fast inflation, it can fully inflate five tyres from 0-40 PSI in one duty cycle. SMART PRESSURE — An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy. INTUITIVE INTERFACE — A digital display allows accurate pressure settings from 15 to 100 PSI, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. WHAT'S IN THE BOX — AIR20 20-Amp Tyre Inflator Air Compressor with 1-Meter Braided Inflation Hose and a 6-Meter Power Cord with Battery Clamps, Multiple Adapters (Presta Valve, Needle, and Inflatable Toy), Microfiber Storage Bag

The key features of this range include: 1) Construction: Cast metal case with rubberised feet so the product doesn't "walk" when operated. 2) Performance: Experience the unparalleled speed and efficiency of powerful motors that seamlessly inflate tyres in astonishingly swift times (varies by product). Or quickly top off (35-40 PSI) low tires in seconds. 3) Accuracy: An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy 4) Emergency: An ultra-bright 60 lumen LED flashlight with 6 light modes, including SOS emergency modes. 5) Interface: A digital display allows accurate pressure settings, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. ULTRAFAST INFLATION — Experience the unparalleled speed and efficiency of a 138-watt motor seamlessly inflating tyres from 0 to 40 PSI in an astonishingly swift 3.8 minutes. Or quickly top-off low tyres (35-40 PSI) in less than 41 seconds. RUN LONGER — Its superior duty cycle simply does more work than comparable tyre inflators by allowing continuous operation for 25 minutes. Coupled with its fast inflation, it can fully inflate six tyres from 0-40 PSI in one duty cycle. SMART PRESSURE — An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy. INTUITIVE INTERFACE — A digital display allows accurate pressure settings from 15 to 60 PSI, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. WHAT'S IN THE BOX — AIR10 10-Amp Tyre Inflator Air Compressor with 1-Meter Braided Inflation Hose and a 3-Meter Power Cord with a 12V Cigarette Lighter Plug, Multiple Adapters (Presta Valve, Needle, and Inflatable Toy), Microfiber Storage Bag

INTRODUCING NOCO AIR15 - The next generation of portable tyre inflator air compressors utilizing advanced motor and airflow design with uncompromising performance for tires up to 33-inches. It runs longer, fills faster, and infinitely better.

JACK HANDLE, ALL STEEL, 1" Ø X 30" LONG SUITS SIMPLEX 85A (RJ85A) JACK