Assorted Springs and Compression Springs, Supplied in partitioned case
Quantity: 200

Assorted Imperial Roll Pins, Supplied in partitioned case
Quantity: 120

Assorted Metric O-Rings, Supplied in partitioned case
Quantity: 225
Set contents (approximate quantity): 3.5 x 1.7 (x20), 4.5 x 1.7 (x20), 5 x 1.7 (x20), 6 x 1.7 (x20), 7.5 x 1.7 (x20), 9 x 1.5 (x15), 9.5 x 2.5 (x15), 10.5 x 2.5 (x15), 12.5 x 2.5 (x10), 14 x 2.5 (x10), 15.5 x 2 (x10), 15.5 x 2.5 (x10), 17 x 2.5 (x10), 18.5 x 3.5 (x10), 19 x 2.5 (x10), 21 x 3.5mm (x10)

INTRODUCING NOCO AIR15 - The next generation of portable tyre inflator air compressors utilizing advanced motor and airflow design with uncompromising performance for tires up to 33-inches. It runs longer, fills faster, and infinitely better.

Product Code: 0039/047851 Previously LP18679 Suitable for extracting FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol baseplate types VIPA-SP & SFC baseplate. Instructions for Extractor AE17385 The Extractor tool acts as a lever against the web of the rail and the toe of the clip. To locate the tool hold at angle away from the rail and move forwards to position the tool between the rail and the shoulder, with the rear clip catching frame towards the operators foot. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handles away until the rear of the clip touches the catching frame, to ensure the clip remains in the shoulder, to locate in the ‘Parked’ position. Care should be taken to maintain the operator’s balance during clip extraction as the handle is pushed away. To remove the clip completely from the shoulder, keep pushing the handle so the frame hinges upwards and the clip is removed from the shoulder.

DATA SHEET

https://unilite.co.uk/wp-content/uploads/2021/07/IL-375R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/IL-175R-Data-Sheet.pdf

The Karcher Xpert range are robust, reliable Karcher professional pressure washers specially designed for the rigours of trade & construction use.

The Xpert OneTen HD 7125 features tough components throughout, including a brass cylinder head & water inlet, 10m heavy duty wire-braided antikink hose & stainless steel pistoms & spray lance.

Thanks to its 1.4kW motor, the Xpert OneTen provides a max pressure output of 110 bar, enabling you to quickly & easily blast dirt away from the cleaning surface. The detergent intake hose also allows you to apply chemical through the machine, helping to remove any stubborn / ingrained dirt.

The Karcher Xpert range now features the EASY!Force tigger gun, giving you the power to use the high pressure output with ease.

The revolutionary operating concept of the EASY!Force trigger gun uses the recoil force of the high pressure jet & reduces the holding force for the trigger to zero, ensuring more effortless, ergonomic & stress-free use.

In addition the Xpert OneTen also features Karcher’s patented EASY!Lock quick locks, meaning connection is quick and easy, 5 times faster compared with conventional screw connections whilst remaining just as durable & robust. The Xpert OneTen will also feature a stainless steel spray lance, EASY!Force trigger gun & triple nozzle.

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.