Search results for 'karcher professional ever'
Maximum Search query length is 25. Your query was cut.
-
Hi-Vis Chainsaw Trousers (XL)
£181.25- Hi-Vis Chainsaw Trousers (XL)
- Elasticated waist
- Stretch Material in crotch for easy movement
- 1 x velcro back pocket
- 1 x velcro side pocket
- Type C CLASS 1 Protection Conforms to EN381-5 20m/s
- EN471 : 2004 class 2
- Internal side seem to prevent snagging
- Zip fly
- Eight layers of all round protection
- Buttons for braces and kidney flap for comfort
- Ultra light pro trouser
- Reflective hi-viz stripes 7cm
-
Slewing Jack. Stumec, 5T on Shoe. 7T on Head Hydraulic
This versatile jack is designed, by means of a removable slewing shoe, for slewing, aligning and lifting railway tracks, points and crossings. The jack is obstructionless to prevent traffic interruption, will slew up to 50mm, and is fitted with an overload safety valve. Lifting Capacity 5t - shoe, 7t - head Lift on Shoe 160mm Lift per pump stroke 4mm - shoe Weight of Jack 24.5kg Weight of Shoe 3.5kg Weight of Standard Lever 2.2kg -
Pan Jack. Zwicky / Kenhi 10T SWL 1054 Hydraulic
This obstructionless jack is fitted with an overload safety valve and tested to 25% over the rated capacity. The jack is placed under the rail without removal of ballast. Despite its low height of 95mm the jack is capable of a 101mm lift due to its hydraulic telescopic ram. Weight 16.5kg Safe Working Load 10t Closed Height 95mm Stroke Length 101mm n Item code: 09 002 SWL: 10t on head Closed height: 95mm Extended height: 196mm Lifting stroke: 101mm Weight of standard lever: 3.2kg Weight of insulated lever: 2.5kg Weight: 16.5kg -
PANDROL TYPE PAN PULLER, E CLIP,TYPE D FOR PR & E CLIPS
£136.25PANDROL No. LP7632 Especially for e2001 and e2007clips but NOT for 4-shoulder baseplates. NOTE hook positions for max efficiency: Upper pivot: Clip installation Lower pivot: Clip extraction All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use. Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER -
PANDROL TYPE EXTRACTOR FASTCLIP FE / FC & VIPA-SP, SFC ALL CREAM COLOUR 0039/047851
£187.50Product Code: 0039/047851 Previously LP18679 Suitable for extracting FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol baseplate types VIPA-SP & SFC baseplate. Instructions for Extractor AE17385 The Extractor tool acts as a lever against the web of the rail and the toe of the clip. To locate the tool hold at angle away from the rail and move forwards to position the tool between the rail and the shoulder, with the rear clip catching frame towards the operators foot. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handles away until the rear of the clip touches the catching frame, to ensure the clip remains in the shoulder, to locate in the ‘Parked’ position. Care should be taken to maintain the operator’s balance during clip extraction as the handle is pushed away. To remove the clip completely from the shoulder, keep pushing the handle so the frame hinges upwards and the clip is removed from the shoulder. -
PICK NAVVY CHISEL & POINT INSULATED, 7LB
£32.19BS8020 Insulated Fibreglass Pick Shaft. Pultruded fibreglass core with an injection moulded polypropylene outer. BS Standard 3'' x 2'' eye. Tested and made in conformance with BS8020:2011. Tools for live working. This shaft is designed to be a tap on fit, however when fitting a replacement shaft, the eye should be dressed to suit the hammer head by a competent person. -
STEL ELASTIC SPIKE EXTRACTOR
£178.95Hand-tools for PANLOCK and Elastic Spikes.
Hammers should NEVER be used for either insertion or extraction of PANLOCK.
Hammers may be used for the loosening of rusty PANLOCK, but NOT to fully extract.
Hammers can be used for the insertion of elastic spikes.
Available from Tool and Steel.
This tool is supplied with separate and detailed operating instructions.
-
Original Source Creamy Vanilla & Raspberry Hand Wash 300ml Pack of 6
£25.95Have sweet-smelling, clean hands whenever you wash them with Original Source Creamy Vanilla Milk & Raspberry Hand Wash. This 300ml bottle has a handy pump dispenser that's packed with 100% natural fragrances.
It's great for the hands and leaves the skin feeling soft and smooth. Add Original Source Hand Wash to your home's handwashing routine for beautifully scented hands with every wash.
- 300ml Original Source Hand Wash X6
- Creamy vanilla & raspberry scent
- 100% natural fragrance
- Vegan-friendly
- Recyclable bottle
- Out of stock
- Add to Wishlist
- | Add to Compare
-
Unilite LED 275 Lumen Aluminium Pen Light PL-3
£12.95275 LUMEN SMD LED POCKET ALUMINIUM INSPECTION LIGHT WITH MAGNETIC BASE & META POCKET CLIP - 3 x AAA BATTERIES (INC)
FREE HAND SANITISER WITH EVERY PURCHASE!
-
Unilite LED USB Rechargeable Headlight HL-4R 275 Lm 2 x additional 5m RED LEDs
£54.95275 LUMEN CREE LED USB RECHARGABLE HELMET MOUNTABLE HEADLIGHT WITH 2 x 5mm RED LEDs - 3.7v 1800mAh LI-POLYMER INTEGRAL BATTERY C/W DRAWSTRING STORAGE POUCH