750 LUMEN CREE LED USB RECHARGEABLE HEADLIGHT WITH LI-ION BATTERY PACK WITH RED LIGHT, MICRO-USB CABLE - 2x 3.7v 2000mAh LI-ION BATTERIES (INC) - COMES IN ZIPPED BLACK STORAGE CASE 

475 LUMEN SENSOR HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT - 3.7v 1800mAh LI-PO INTEGRAL BATTERY (INC) C/W DRAWSTRING STORAGE POUCH 

450 LUMEN CREE LED HEADLIGHT WITH SPOT & FLOOD LEDs - HYBRID BATTERY PACK - 1 x 2600mAh 18650 LI-ION(INC) AND TAKES 2 x AA BATTERIES (NOT INC) C/W ZIPPED WET SUIT MATERIAL STORAGE POUCH

350 LUMEN SMD LED DUAL POWER HELMET MOUNTABLE HEADLIGHT WITH LI-ION BATTERY PACK, MICRO-USB LEAD, AAA BATTERY CASE, 3M ADHESIVE HELMET MOUNT 

DATA SHEET

325 LUMEN COB LED INDUSTRIAL IK07 SENSOR HEADLIGHT - 3.7v 1500mAh LI-PO INTEGRAL BATTERY - MICRO-USB CABLE (INC)

275 LUMEN CREE LED USB RECHARGABLE HELMET MOUNTABLE HEADLIGHT WITH 2 x 5mm RED LEDs - 3.7v 1800mAh LI-POLYMER INTEGRAL BATTERY C/W DRAWSTRING STORAGE POUCH

200 LUMEN CREE LED HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT AND 2 x 5mm WHITE LEDs - 3 x AAA ENERGIZER (INC)

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180

Ready to use surface cleaner for manual application. Dries quickly and streak-free. Up to 40 applications per spray head.

Scale inhibitor for hot water high-pressure cleaners with integral corrosion protection, especially for use in new HDS units with System Care option. The System Care Advance 1 RM 110 ASF formula offers improved protection against limescale deposits on heater coils (up to 150 °C) and provides integral corrosion protection for components in contact with water.