Fastclip Installation Tool F41/G44/EG47 Cat No. 0039/047850 RB/BR/123 Suitable for all steel and concrete sleeper types. The installation tool has two functions, each achieved by simply re-positioning a moveable pin. With the pin passing through the rear hole of the claw, installation of a Pandrol Fastclip assembly in the ‘switched off’ position is carried out. When the pin is re-positioned to the front hole of the claw and the installation operation repeated, the assembly will be in the ‘switched on’ position.

EXTRACTOR, FASTCLIP FC, STEL, CREAM/GREEN 0039/047851 Fastclip Extraction Tool F41/G44/EG47 Cat No. 0039/047851 RB/BR/12 Suitable for all steel and concrete sleeper types. The extraction tool is used for side post insulator and clip/toe insulator replacement.

Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool.

Rear arch extractor for FASTCLIP ‘FC PANDROL No. LP15177 The rear arch extractor remains available to extract clips around IBJ’s. This tool is ONLY needed at IBJ’s in order to extract clips which are shielded by the scalloped section of the joint. It is also unique to FASTCLIP ‘FC’ and does NOT work with ‘FE’ clips. Instructions for Rear Arch Extractor The hooks in the frame of the tool locate into the reaction points on the shoulder, as shown in the photograph. The clip is extracted using the tines inserted in the rear arches of the clip. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handle away to extract the clip, stopping at the ‘Parked’ position, or continuing to push away to fully extract the clip from the shoulder.

Strong, Flexible Aluminium Foil Tape (50mm x 45m) on Silicon Paper Liner for use on Most Surfaces. Flame Retardant and Excellent Temperature Performance. UV-Resistant and Waterproof

• Jerry Can Flexible Pouring Spout (Yellow)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

Jerry Can Flexible Pouring Spout (Red)
Optimum flow is assured when using our spouts with our cans
Special breathing channel provide steady, glug-free pouring
Each spout has an internal filter to protect charging tank from dirt and foreign bodies
Suitable for 5L, 10L and 20L Jerry Cans
Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

• Jerry Can Flexible Pouring Spout (Green)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

• Jerry Can Flexible Pouring Spout (Black)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

• The Hi-Vis Quick Release Rucksack features fabric and reflective tape that meets the requirements of GO/RT 3279 & EN ISO 20471.
• The innovative quick release anti-entanglement system is designed as a protection device when working in hazardous conditions.
• Features include a secure, weatherproof MP3/CD and mobile phone outlet as well as padded straps and back panel for wearer comfort.
• 100% Polyester 600D Fabric
• 210T PA Coated Fabric
• Orange
• 25 Litre Capacity
• L28cm x W21cm x H43cm