Search results for 'unilite work light 500 lu'

Maximum Search query length is 25. Your query was cut.

Relevance
Set Ascending Direction

Grid List

10 per page

Items 111 to 120 of 234 total

  1. Insulated Treaded Taper Mouth Shovel - BS8020:2011 Insulated Treaded Taper Mouth Shovel - BS8020:2011

    Insulated Treaded Taper Mouth Shovel - BS8020:2011

    £32.50

    Insulated Taper Mouth Shovel Treaded Shovel

    Tested And Certified To BS8020:2011

    Handle - 28" / 711mm

    Blade Size - 10" Wide By 8.1/2" Tapering To 12.1/2" Long

    Tested For Live Work Used for shovelling out or concrete mixing, working tarmac and cement, backfilling trenches and manouvering ballast.

  2. Insulated  Treaded Square Mouth Shovel - BS8020:2011 Insulated  Treaded Square Mouth Shovel - BS8020:2011

    Insulated Treaded Square Mouth Shovel - BS8020:2011

    £32.50

    Insulated Square Mouth Shovel Treaded Shovel

    Tested And Certified To BS8020:2011

    Handle - 28" / 711mm

    Blade Size - 8" Wide By 10.1/2" Long

    Tested For Live Work Used for shovelling out or concrete mixing, working tarmac and cement, backfilling trenches and manouvering ballast.

  3. Ratchet Jack, Simplex. A1022N 10T Capacity, Controlled Lift & Lower

    Ratchet Jack, Simplex. A1022N 10T Capacity, Controlled Lift & Lower

    Lightweight with aluminium body and large base for increased stability. Strong ratchet mechanism ensures controlled lifting and lowering of load with minimal effort. Capacity 10t Stroke 305mm Closed Height - Head 550mm Closed Height - Toe 51mm Weight 19kg
  4. Pan Jack. Zwicky / Kenhi 10T SWL 1054 Hydraulic

    Pan Jack. Zwicky / Kenhi 10T SWL 1054 Hydraulic

    This obstructionless jack is fitted with an overload safety valve and tested to 25% over the rated capacity. The jack is placed under the rail without removal of ballast. Despite its low height of 95mm the jack is capable of a 101mm lift due to its hydraulic telescopic ram. Weight 16.5kg Safe Working Load 10t Closed Height 95mm Stroke Length 101mm n Item code: 09 002 SWL: 10t on head Closed height: 95mm Extended height: 196mm Lifting stroke: 101mm Weight of standard lever: 3.2kg Weight of insulated lever: 2.5kg Weight: 16.5kg
  5. Toe Jack. Zwicky / Kenhi 1527 Hydraulic Jack. 20T on Head, 15T on Toe

    Toe Jack. Zwicky / Kenhi 1527 Hydraulic Jack. 20T on Head, 15T on Toe

    Supplied with an overload safety valve and tested to 25% over the rated capacity. Designed for use on switches and crossings, this heavy duty jack is obstructionless for rails 42kg/m and over. Safe working load: 20t - head, 15t - toe Closed height: 343mm - head, 191mm - toe Toe to head: 152mm Lifting stroke: 110mm Weight: 36kg
  6. PANDROL TYPE EXTRACTOR FASTCLIP FE / FC & VIPA-SP, SFC ALL CREAM COLOUR 0039/047851 PANDROL TYPE EXTRACTOR FASTCLIP FE / FC & VIPA-SP, SFC ALL CREAM COLOUR 0039/047851

    PANDROL TYPE EXTRACTOR FASTCLIP FE / FC & VIPA-SP, SFC ALL CREAM COLOUR 0039/047851

    £187.50
    Product Code: 0039/047851 Previously LP18679 Suitable for extracting FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol baseplate types VIPA-SP & SFC baseplate. Instructions for Extractor AE17385 The Extractor tool acts as a lever against the web of the rail and the toe of the clip. To locate the tool hold at angle away from the rail and move forwards to position the tool between the rail and the shoulder, with the rear clip catching frame towards the operators foot. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handles away until the rear of the clip touches the catching frame, to ensure the clip remains in the shoulder, to locate in the ‘Parked’ position. Care should be taken to maintain the operator’s balance during clip extraction as the handle is pushed away. To remove the clip completely from the shoulder, keep pushing the handle so the frame hinges upwards and the clip is removed from the shoulder.
  7. PICK NAVVY CHISEL & POINT INSULATED, 7LB PICK NAVVY CHISEL & POINT INSULATED, 7LB

    PICK NAVVY CHISEL & POINT INSULATED, 7LB

    £32.19
    BS8020 Insulated Fibreglass Pick Shaft. Pultruded fibreglass core with an injection moulded polypropylene outer. BS Standard 3'' x 2'' eye. Tested and made in conformance with BS8020:2011. Tools for live working. This shaft is designed to be a tap on fit, however when fitting a replacement shaft, the eye should be dressed to suit the hammer head by a competent person.
  8. Impact Socket Bi-Square 1-11/16" x 1" Drive

    Impact Socket Bi-Square 1-11/16" x 1" Drive

    £19.01
    Impact Socket Bi-Square 1-1/8" x 1" Drive
  9. BBH30 SAFETY SPECTACLES EN166 CLEAR LENS PINK ARMS

    BBH30 SAFETY SPECTACLES EN166 CLEAR LENS PINK ARMS

    £6.45

    Ergonomic temple for comfort fit.

    • Temple tip locking catch.
    • Temple ratchet adjustment.
    • Hard coated polycarbonate lens.
    • Anti-fog and anti-scratch.
    • Soft nose pad.

    Ergonomic temple provides comfortable, self-adjusting and a more secure fit to the users head. The swaying ergo temple pieces will spread the pressure evenly across the users temple area.

    Temple ratchet adjustment works closely with the ergo temple to help the user wearing the product with different pantoscopic angles, suitable for all head shapes.

    • Conform to EN166:
    • Optical Class:1
    • F T - (Low impact energy at extreme temperatures)
    • 2C-1.2 - UV Filter
    • K - Scratch Resistant
    • N - Fog Resistant

  10. HAND HELD INFRARED THERMOMETER IR-801  Easy-to-use infrared thermometer with Class II laser sighting, ideal for non-contact measurement of surface temperatures. Suitable for food preparation, plant & general maintenance, HVAC, transport & automotive, asph

    HAND HELD INFRARED THERMOMETER IR-801

    £62.95

    HAND HELD INFRARED THERMOMETER IR-801

    Easy-to-use infrared thermometer with Class II laser sighting, ideal for non-contact measurement of surface temperatures. Suitable for food preparation, plant & general maintenance, HVAC, transport & automotive, asphalt, health & safety, diesel and eet maintenance.

    Features:

    • -50° to 350°C x 0.1°
    • Measures °C or °F
    • Point, pull the trigger and read the display
    • Class II laser to identify the centre point of the area being measured
    • Distance to spot size ratio is 13 to 1 at the focal point
    • Fixed emissivity at 0.95
    • Response time less than 500 milliseconds
    • 25mm LCD display with backlight
    • Automatic data hold when trigger released
    • Min/max memory
    • Auto power-off after 20 seconds of no activity
    • Low battery indication
    • Backlight and laser can be user disabled
    • Impact-resistant ABS case 
    • Supplied with battery: LR-61
Relevance
Set Ascending Direction

Grid List

10 per page

Items 111 to 120 of 234 total