Tygris R220 is a heavy duty, molybdenum disulphide reinforced lubricant which penetrates deeply into drive chains and wire ropes to give long lasting lubrication, preventing corrosion, wear and chain elongation. It gives outstanding performance under extreme load and is resistant to fling off

A multi-purpose product which actively displaces water leaving an electrically non-conductive barrier
Penetrates rust and corrosion by capillary action, loosening rusted parts
Protects metal against rust and corrosion
Cleans away grease and grime
Leaves a protective film of lubricant
5 Litre Plastican with Spray Bottle

Safety Data Sheet -

Screen Wash
Quantity: 1
Ready Mixed
Size: 5 Litre Plastican

Safety Data Sheet -

FORCE Power Spray & Fluid
Quantity: 1
High specification maintenance spray
Silicone free for body shop use

Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.

The Vortok Fastclip Stressing Roller is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

The VSR is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Insulated Simplex A17 Jack Handle
Insulated to BS8020

Insulated Hydramite Jack Handle
Insulated to BS8020