Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180

PANDROL No. LP7632 Especially for e2001 and e2007clips but NOT for 4-shoulder baseplates. NOTE hook positions for max efficiency: Upper pivot: Clip installation Lower pivot: Clip extraction All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use. Installation Instructions ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER

Cat No; Reference: 0039/42900 The PANSETTER is suitable for all Network Rail Sleepers fitted with PR, e & e-PLUS. Used for lifting the sleeper to the rail foot. It pushes the rail over, leaving the correct gap between the rail foot and the Pandrol housing, so that the insulator can be easily placed in the correct position. All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use.