Search results for 'jerry can yellow 20 ltr'

Relevance
Set Ascending Direction

Grid List

10 per page

Items 41 to 50 of 245 total

  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. Rotabroach TCT Long Series Rail Cutters 20mm

    Rotabroach TCT Long Series Rail Cutters 20mm

    £60.17
    Genuine Rotabroach TCT Long Series Rail Cutter 20mm
  2. Rotabroach TCT Standard / Short Series Rail Cutters 32mm

    Rotabroach TCT Standard / Short Series Rail Cutters 32mm

    £51.68
    Genuine Rotabroach TCT Short Series Rail Cutter 32mm
  3. PANDROL TYPE PAN PULLER, E CLIP,TYPE D FOR PR & E CLIPS PANDROL TYPE PAN PULLER, E CLIP,TYPE D FOR PR & E CLIPS

    PANDROL TYPE PAN PULLER, E CLIP,TYPE D FOR PR & E CLIPS

    £136.25
    PANDROL No. LP7632 Especially for e2001 and e2007clips but NOT for 4-shoulder baseplates. NOTE hook positions for max efficiency: Upper pivot: Clip installation Lower pivot: Clip extraction All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use. Installation Instructions ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER
  4. PICK NAVVY CHISEL & POINT INSULATED, 7LB PICK NAVVY CHISEL & POINT INSULATED, 7LB

    PICK NAVVY CHISEL & POINT INSULATED, 7LB

    £32.19
    BS8020 Insulated Fibreglass Pick Shaft. Pultruded fibreglass core with an injection moulded polypropylene outer. BS Standard 3'' x 2'' eye. Tested and made in conformance with BS8020:2011. Tools for live working. This shaft is designed to be a tap on fit, however when fitting a replacement shaft, the eye should be dressed to suit the hammer head by a competent person.
  5. MARKER BOARD, COMPACT WORKSITE

    MARKER BOARD, COMPACT WORKSITE

    A Network Rail approved compact marker board, to denote a work site within a possession. PADS No; 0020/039499 Powered by 2No “C” cell batteries. Automatic On/Off operation—No keys to use or loose! Size 400mm x 240mm Complies with NWR Group Standard GIRT/7033 Issue 2 Supplied with batteries
  6. JACK HANDLE A17 SIMPLEX @ 1200MM LONG WHITE ROUND METAL HANDLE, NEW VERSION JACK HANDLE A17 SIMPLEX @ 1200MM LONG WHITE ROUND METAL HANDLE, NEW VERSION

    JACK HANDLE A17 SIMPLEX @ 1200MM LONG WHITE ROUND METAL HANDLE, NEW VERSION

    £51.30
    JACK HANDLE A17 SIMPLEX @ 1200MM LONG WHITE ROUND METAL HANDLE, NEW VERSION
  7. NEW
    GALAXY WORKSTATION CONNECT LIGHT BARE UNIT C/W 4 ADAPTORS, ACCEPTS 14-21V BATTERIES BLACK & DECKER, BOSCH, MAKITA, STANLEY, BLACK & DECKER, BOSCH, MAKITA, STANLEY, GALAXY WORKSTATION CONNECT LIGHT BARE UNIT C/W 4 ADAPTORS, ACCEPTS 14-21V BATTERIES BLACK & DECKER, BOSCH, MAKITA, STANLEY, BLACK & DECKER, BOSCH, MAKITA, STANLEY,

    GALAXY WORKSTATION CONNECT LIGHT BARE UNIT C/W 4 ADAPTORS, ACCEPTS 14-21V BATTERIES BLACK & DECKER, BOSCH, MAKITA, STANLEY, BLACK & DECKER, BOSCH, MAKITA, STANLEY,

    £59.10
    The WorkStar Connect accepts 14 to 21V batteries from 7 leading power tool brands, allowing you to easily utilise the rechargeable battery pack(s) you already own. It’s an ideal workshop companion that can withstand hard knocks due to the high impact housing and toughened glass lens. Tripod mountable, with powerful magnetic feet & a hanging hook, it also features a built-in power bank facility to charge your phone/tablet. Key features: Supplied with 4 power tool adapters 3 light modes – high, medium, low Beam distance up to 25m Toughened glass lens USB power bank facility to charge your phone/tablet Supplied with 4 adaptors. Accepts 14-21V batteries: Black & Decker, Bosch, Makita, Stanley, DeWalt, Porter and Milwaukee (Batteries not included).
  8. NEW
    SKATE BASKET, ALUMINIUM TFL SPEC, NYLON WHEELS C/W 2 X HANDLES AND KICK STAND SKATE BASKET, ALUMINIUM TFL SPEC, NYLON WHEELS C/W 2 X HANDLES AND KICK STAND

    SKATE BASKET, ALUMINIUM TFL SPEC, NYLON WHEELS C/W 2 X HANDLES AND KICK STAND

    Minimum Space Required in Vehicle All aluminium body & handles Integrated kick stand Minimum Space Required in Vehicle Support Arm Works as Stabiliser during Loading and Unloading Reduce potential injury and fatigue to operator Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height) Safe and efficient method of transporting tools and smaller plant equipment to worksite Width - 360mm Length - 870mm Height - 190mm (without push handles fitted) Height - 820mm (with push handles fitted) Weight - 7kg (without push handles fitted) Weight - 10kg (with push handles fitted) Safe Working Load - (LU Spec) 75kg BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance. RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.
  9. NEW
    CHAINSAW SAFETY GAITERS, COATED FABRIC EXTERIOR, ONE SIZE INNER LINER, POLY/COTTON, ADJUSTING STRAPS EN381-9: 1997, CLASS 1 20 M/S CHAINSAW SAFETY GAITERS, COATED FABRIC EXTERIOR, ONE SIZE INNER LINER, POLY/COTTON, ADJUSTING STRAPS EN381-9: 1997, CLASS 1 20 M/S

    CHAINSAW SAFETY GAITERS, COATED FABRIC EXTERIOR, ONE SIZE INNER LINER, POLY/COTTON, ADJUSTING STRAPS EN381-9: 1997, CLASS 1 20 M/S

    £79.88
    COATED FABRIC EXTERIOR, ONE SIZE INNER LINER, POLY/COTTON, ADJUSTING STRAPS EN381-9: 1997, CLASS 1 20 M/S
  10. Rotabroach TCT Standard / Short Series Rail Cutters 20mm SCRWC20 - 20mm  Genuine Rotabroach TCT Short Series Rail Cutter 20mm

    Rotabroach TCT Standard / Short Series Rail Cutters 20mm

    £48.95

    SCRWC20 - 20mm

    Genuine Rotabroach TCT Short Series Rail Cutter 20mm

Relevance
Set Ascending Direction

Grid List

10 per page

Items 41 to 50 of 245 total

  1. 3
  2. 4
  3. 5
  4. 6
  5. 7