Rear arch extractor for FASTCLIP ‘FC PANDROL No. LP15177 The rear arch extractor remains available to extract clips around IBJ’s. This tool is ONLY needed at IBJ’s in order to extract clips which are shielded by the scalloped section of the joint. It is also unique to FASTCLIP ‘FC’ and does NOT work with ‘FE’ clips. Instructions for Rear Arch Extractor The hooks in the frame of the tool locate into the reaction points on the shoulder, as shown in the photograph. The clip is extracted using the tines inserted in the rear arches of the clip. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handle away to extract the clip, stopping at the ‘Parked’ position, or continuing to push away to fully extract the clip from the shoulder.

Assorted Electrical Terminals, Supplied in partitioned case.
Quantity: 520
Includes spade terminals, ring terminals, butt connectors, female connectors and male connectors.

Assorted car blade fuses, supplied in a transparent partitioned case.

Quantity: 120 blade fuses in total.

A useful assortment of popular, standard sized fuses used within the automotive industry.

Each handy partitioned container includes:

• 20 x 5 amp car blade fuses
• 20 x 10 amp car blade fuses
• 20 x 15 amp car blade fuses
• 20 x 20 amp car blade fuses
• 20 x 25 amp car blade fuses
• 20 x 30 amp car blade fuses

Assorted Hose Clips, Supplied in partitioned case.
Qyantity: 26

Assorted Copper Washers, Supplied in partitioned case.
Quantity: 110
Approximately Contains the Following: 30pc x 5mm / 25pc x 6mm / 20pc x 8mm / 15pc x 10mm / 10pc x 12mm / 10pc x 16mm

Assorted Grommets, Supplied in partitioned case. Approximately Includes: 15 x 3.18mm x 6.35mm / 10 x 5.57mm x 7.94mm / 7 x 7.14mm x 12.7mm / 3 x 12.7mm x 15.08mm / 6 x 9.53mm x 11.91mm / 5 x 9.53mm x 12.7mm / 3 x 7.94mm x 14.29mm 3 x 9.53mm x 20.64mm / 4 x 11.11mm x 19.05mm / 3 x 15.88mm x 24.61mm / 2 x 19.05mm x 23.81mm / 20 x blanking grommet 7.14mm / 20 x blanking grommet 9.53mm / 10 x blanking grommet 12.07mm / 5 x blanking grommet 15.88mm / 4 x blanking grommet 19.05mm / 3 x blanking grommet 22.23mm / 2 x blanking grommet 25.4mm

Assorted Cotter Pins, Supplied in partitioned case.
Approximately Includes: 3.2mm x 50mm cotter pins x 50pc / 4mm x 64mm cotter pins x 30pc / 4.8mm x 76mm cotter pins x 20pc / 6.4mm x 25mm cotter pins x 20pc / 6.4mm x 76mm cotter pins x 16pc / 8mm x 64mm cotter pins x 8pc

Assorted Grease Nipples, Supplied in partitioned case.
Six of the most common sized grease nipples.
Quantity: 110

Assorted Wing Nuts, Supplied in partitioned case.
Quantity: 150
Approximately Includes: (30) 3/16" x 24TPI, (30) 3/16" x 32TPI, (25) 1/4" x 20TPI, (25) 1/4" x 28TPI, (20) 5/16" x 18TPI, (20) 5/16" x 24TPI

Assorted Springs and Compression Springs, Supplied in partitioned case
Quantity: 200