Rear arch extractor for FASTCLIP ‘FC PANDROL No. LP15177 The rear arch extractor remains available to extract clips around IBJ’s. This tool is ONLY needed at IBJ’s in order to extract clips which are shielded by the scalloped section of the joint. It is also unique to FASTCLIP ‘FC’ and does NOT work with ‘FE’ clips. Instructions for Rear Arch Extractor The hooks in the frame of the tool locate into the reaction points on the shoulder, as shown in the photograph. The clip is extracted using the tines inserted in the rear arches of the clip. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handle away to extract the clip, stopping at the ‘Parked’ position, or continuing to push away to fully extract the clip from the shoulder.

• Tongs used for the safe manual handling and moving of Steel Sleepers.
• Built to be both durable and robust, they allow the rail worker to use them to re-position and remove steel sleepers as required.
• Insulated to BS8020.

Impact Socket 15mm Hexagon 1/2" Drive

Impact Socket Hexagon 32mm x 1" Drive

Impact Socket Hexagon 30mm x 1" Drive

Impact Socket Bi-Square 1-5/16" x 1" Drive

NGK Spark Plug CR9EH9

Assorted car blade fuses, supplied in a transparent partitioned case.

Quantity: 120 blade fuses in total.

A useful assortment of popular, standard sized fuses used within the automotive industry.

Each handy partitioned container includes:

• 20 x 5 amp car blade fuses
• 20 x 10 amp car blade fuses
• 20 x 15 amp car blade fuses
• 20 x 20 amp car blade fuses
• 20 x 25 amp car blade fuses
• 20 x 30 amp car blade fuses

Assorted Copper Washers, Supplied in partitioned case.
Quantity: 110
Approximately Contains the Following: 30pc x 5mm / 25pc x 6mm / 20pc x 8mm / 15pc x 10mm / 10pc x 12mm / 10pc x 16mm

Assorted Grommets, Supplied in partitioned case. Approximately Includes: 15 x 3.18mm x 6.35mm / 10 x 5.57mm x 7.94mm / 7 x 7.14mm x 12.7mm / 3 x 12.7mm x 15.08mm / 6 x 9.53mm x 11.91mm / 5 x 9.53mm x 12.7mm / 3 x 7.94mm x 14.29mm 3 x 9.53mm x 20.64mm / 4 x 11.11mm x 19.05mm / 3 x 15.88mm x 24.61mm / 2 x 19.05mm x 23.81mm / 20 x blanking grommet 7.14mm / 20 x blanking grommet 9.53mm / 10 x blanking grommet 12.07mm / 5 x blanking grommet 15.88mm / 4 x blanking grommet 19.05mm / 3 x blanking grommet 22.23mm / 2 x blanking grommet 25.4mm