The Vortok Fastclip Stressing Roller is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.

The WVP 10 Adv is a lightweight, handheld, battery operated wet surface cleaner which provides the ideal solution for cleaning all flat surfaces, providing a streak free cleaning solution.

Lightweight, ergonomic and universal
Suitable for all types of smooth surfaces − horizontal, vertical or even overhead.
Comfortable handling and easy to operate.
Safe, easy handling thanks to rubber handle.

Removable, replaceable battery
Allows external battery charging and, in conjunction with a spare battery, uninterrupted working.
Charging state is displayed by 3 LEDs above the ON/OFF switch.

Convenient cleaning of edges
Streak-free cleaning results right up to the edges thanks to the manually adjustable spacer.

Large volume of dirty water tank
Reduces work interruptions thanks to frequent emptying, thus increasing productivity.

WVP 10 Adv version with quick charger
The quick charger and second battery enable almost entirely uninterrupted cleaning.

WVP 10 Adv version with additional narrow suction nozzle
Especially suited to small areas which are not accessible with the standard nozzle.

Powerful lithium-ion battery
Enables work periods of around 30 minutes at a time.

British Rail, Network Rail, Rail

SOCKET, IMPACT, BI-SQUARE, 1-1/8" X 1" DRIVE, AS CHAIR SCREW

50mm pin
500mm ring suits this socket

DATA SHEET

A Network Rail approved compact marker board, to denote a work site within a possession. PADS No; 0020/039499 Powered by 2No “C” cell batteries. Automatic On/Off operation—No keys to use or loose! Size 400mm x 240mm Complies with NWR Group Standard GIRT/7033 Issue 2 Supplied with batteries

Impact Socket Bi-Square 1-1/8" x 1" Drive

Product Code: 0039/047851 Previously LP18679 Suitable for extracting FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol baseplate types VIPA-SP & SFC baseplate. Instructions for Extractor AE17385 The Extractor tool acts as a lever against the web of the rail and the toe of the clip. To locate the tool hold at angle away from the rail and move forwards to position the tool between the rail and the shoulder, with the rear clip catching frame towards the operators foot. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handles away until the rear of the clip touches the catching frame, to ensure the clip remains in the shoulder, to locate in the ‘Parked’ position. Care should be taken to maintain the operator’s balance during clip extraction as the handle is pushed away. To remove the clip completely from the shoulder, keep pushing the handle so the frame hinges upwards and the clip is removed from the shoulder.

This obstructionless jack is fitted with an overload safety valve and tested to 25% over the rated capacity. The jack is placed under the rail without removal of ballast. Despite its low height of 95mm the jack is capable of a 101mm lift due to its hydraulic telescopic ram. Weight 16.5kg Safe Working Load 10t Closed Height 95mm Stroke Length 101mm n Item code: 09 002 SWL: 10t on head Closed height: 95mm Extended height: 196mm Lifting stroke: 101mm Weight of standard lever: 3.2kg Weight of insulated lever: 2.5kg Weight: 16.5kg