Lightweight with aluminium body and large base for increased stability. Strong ratchet mechanism ensures controlled lifting and lowering of load with minimal effort. Capacity 10t Stroke 305mm Closed Height - Head 550mm Closed Height - Toe 51mm Weight 19kg

POLYFIBRE HANDLED CABLE LAYER SHOVEL TREADED, ONE PIECE HANDLE, 28"
PRODUCT SIZE; 5" X 4-1/2" X 11"

Hand-tools for PANLOCK and Elastic Spikes.

Hammers should NEVER be used for either insertion or extraction of PANLOCK.

Hammers may be used for the loosening of rusty PANLOCK, but NOT to fully extract.

Hammers can be used for the insertion of elastic spikes.

Available from Tool and Steel.

This tool is supplied with separate and detailed operating instructions.

HAND HELD INFRARED THERMOMETER IR-801

Easy-to-use infrared thermometer with Class II laser sighting, ideal for non-contact measurement of surface temperatures. Suitable for food preparation, plant & general maintenance, HVAC, transport & automotive, asphalt, health & safety, diesel and eet maintenance.

Features:

• -50° to 350°C x 0.1°
• Measures °C or °F
• Point, pull the trigger and read the display
• Class II laser to identify the centre point of the area being measured
• Distance to spot size ratio is 13 to 1 at the focal point
• Fixed emissivity at 0.95
• Response time less than 500 milliseconds
• 25mm LCD display with backlight
• Automatic data hold when trigger released
• Min/max memory
• Auto power-off after 20 seconds of no activity
• Low battery indication
• Backlight and laser can be user disabled
• Impact-resistant ABS case 
• Supplied with battery: LR-61

INSULATED SLEDGE HAMMER 7LB

35" Overall Length

INSULATED SLEDGE HAMMER 10LB

35" Overall Length

• Helps protect face and eyes from airborne droplets • 100% UK manufactured • One size fit’s all • Transparent visor • Wipeable face shield • Size; W240mm x D280mm approx • Ideal for COVID-19 protection FULLY ASSEMBLED AND READY TO USE

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.

LED WARNING LIGHT

The WVP 10 Adv is a lightweight, handheld, battery operated wet surface cleaner which provides the ideal solution for cleaning all flat surfaces, providing a streak free cleaning solution.

Lightweight, ergonomic and universal
Suitable for all types of smooth surfaces − horizontal, vertical or even overhead.
Comfortable handling and easy to operate.
Safe, easy handling thanks to rubber handle.

Removable, replaceable battery
Allows external battery charging and, in conjunction with a spare battery, uninterrupted working.
Charging state is displayed by 3 LEDs above the ON/OFF switch.

Convenient cleaning of edges
Streak-free cleaning results right up to the edges thanks to the manually adjustable spacer.

Large volume of dirty water tank
Reduces work interruptions thanks to frequent emptying, thus increasing productivity.

WVP 10 Adv version with quick charger
The quick charger and second battery enable almost entirely uninterrupted cleaning.

WVP 10 Adv version with additional narrow suction nozzle
Especially suited to small areas which are not accessible with the standard nozzle.

Powerful lithium-ion battery
Enables work periods of around 30 minutes at a time.