Search results for 'pandrol pan lock puller'

Relevance
Set Ascending Direction

Grid List

10 per page

Items 1 to 10 of 48 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. PAN PULLER, STEL, TYPE C FOR PR & E CLIPS & 4 SHOULDER BASEPLATES 0039/042748 PAN PULLER, STEL, TYPE C FOR PR & E CLIPS & 4 SHOULDER BASEPLATES 0039/042748

    PAN PULLER, STEL, TYPE C FOR PR & E CLIPS & 4 SHOULDER BASEPLATES 0039/042748

    £145.60
    Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.
  2. Insulated Type E Clip & PR Clip Pan Puller Insulated Type E Clip & PR Clip Pan Puller

    Insulated Type E Clip & PR Clip Pan Puller

    £191.95
    Insulated Type E Clip & PR Clip Pan Puller
  3. Spare Hook For E Plus Pan Puller

    PAN PULLER, E PLUS, HOOKS CASE HARDENED TO 45-50 HRc PAINTED BLACK

    £48.30
    PAN PULLER, E PLUS, HOOKS CASE HARDENED TO 45-50 HRc PAINTED BLACK 0039/042742
  4. PAN PULLER, SPARE HOOK RETAINING BOLT Spare Bolt For Pan Puller

    PAN PULLER, SPARE HOOK RETAINING BOLT

    £29.95
    Spare Bolt For Pan Puller
  5. PAN PULLER E PLUS, RED END FOR S & C, SUITS EP20127 CLIPS, SLEEPER TYPES F27, EF28, 5EF28 & NEW S&C DESIGNS TO NR56V PAN PULLER E PLUS, RED END FOR S & C, SUITS EP20127 CLIPS, SLEEPER TYPES F27, EF28, 5EF28 & NEW S&C DESIGNS TO NR56V

    PAN PULLER E PLUS, RED END FOR S & C, SUITS EP20127 CLIPS, SLEEPER TYPES F27, EF28, 5EF28 & NEW S&C DESIGNS TO NR56V

    £312.94
    Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180
  6. PAN PULLER, E CLIP, SPARE HOOK CASE HARDENED TO 45-50 HRc PAINTED BLACK
  7. PAN PULLER, E PLUS, STEL, ALL CREAM . EPPP 0039/042749 Type e-Plus Pan Puller No. AE17256 formerly No. LP15923

    PAN PULLER, E PLUS, STEL, ALL CREAM . EPPP 0039/042749

    £150.60

    No. AE17256 formerly No. LP15923

    Colour: White

    The tool is used with the eP20129 green or eP20130 yellow e-PLUS clips, mostly with RT60 and NR60 S&C layouts.

  8. Wear Gauge For Pan Puller Hook Wear Gauge For Pan Puller Hook

    Wear Gauge For Pan Puller Hook

    £18.95
    It is recommended for safety reasons that contractors should formally check and record the wear of the hooks at intervals of 6 months using the wear gauge.
    The gauge is suitable for all types of Panpuller or e-Plus Panpuller.
    The wear gauge provides easy Go/No-Go assessment of when to replace the hook.
    Work hooks have a tendency to slip off the clips, which can present a significant risk to operators.
  9. KARCHER XPERT HD7125 PRESSURE WASHER COLD XPERT ONE DELUXE 2300W (110V)

    KARCHER XPERT HD7125 PRESSURE WASHER COLD XPERT ONE DELUXE 2300W (110V)

    £695.00

    The Karcher Xpert range are robust, reliable Karcher professional pressure washers specially designed for the rigours of trade & construction use.

    The Xpert OneTen HD 7125 features tough components throughout, including a brass cylinder head & water inlet, 10m heavy duty wire-braided antikink hose & stainless steel pistoms & spray lance.

    Thanks to its 1.4kW motor, the Xpert OneTen provides a max pressure output of 110 bar, enabling you to quickly & easily blast dirt away from the cleaning surface. The detergent intake hose also allows you to apply chemical through the machine, helping to remove any stubborn / ingrained dirt.

    The Karcher Xpert range now features the EASY!Force tigger gun, giving you the power to use the high pressure output with ease.

    The revolutionary operating concept of the EASY!Force trigger gun uses the recoil force of the high pressure jet & reduces the holding force for the trigger to zero, ensuring more effortless, ergonomic & stress-free use.

    In addition the Xpert OneTen also features Karcher’s patented EASY!Lock quick locks, meaning connection is quick and easy, 5 times faster compared with conventional screw connections whilst remaining just as durable & robust. The Xpert OneTen will also feature a stainless steel spray lance, EASY!Force trigger gun & triple nozzle.

  10. Karcher Professional Lawn Mower Battery 18-36 Set

    Karcher Garden Power Lawn Mower Battery 18-36 Set 1.444-422.0

    £435.95

    Battery and fast charger included: the extremely manoeuvrable and lightweight battery lawn mower LMO 18-36 Battery Set with effortlessly and centrally adjustable cutting height on four levels.

Relevance
Set Ascending Direction

Grid List

10 per page

Items 1 to 10 of 48 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5