Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool.

• 27W Rechargeable Cordless LED Work Light with Magnetic Base
• 1800 Lumens
• Including Mains Charger and Car Charger

The key features of this range include: 1) Construction: Cast metal case with rubberised feet so the product doesn't "walk" when operated. 2) Performance: Experience the unparalleled speed and efficiency of powerful motors that seamlessly inflate tyres in astonishingly swift times (varies by product). Or quickly top off (35-40 PSI) low tires in seconds. 3) Accuracy: An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy 4) Emergency: An ultra-bright 60 lumen LED flashlight with 6 light modes, including SOS emergency modes. 5) Interface: A digital display allows accurate pressure settings, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. ULTRAFAST INFLATION — Experience the unparalleled speed and efficiency of a 138-watt motor seamlessly inflating tyres from 0 to 40 PSI in an astonishingly swift 3.8 minutes. Or quickly top-off low tyres (35-40 PSI) in less than 41 seconds. RUN LONGER — Its superior duty cycle simply does more work than comparable tyre inflators by allowing continuous operation for 25 minutes. Coupled with its fast inflation, it can fully inflate six tyres from 0-40 PSI in one duty cycle. SMART PRESSURE — An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy. INTUITIVE INTERFACE — A digital display allows accurate pressure settings from 15 to 60 PSI, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. WHAT'S IN THE BOX — AIR10 10-Amp Tyre Inflator Air Compressor with 1-Meter Braided Inflation Hose and a 3-Meter Power Cord with a 12V Cigarette Lighter Plug, Multiple Adapters (Presta Valve, Needle, and Inflatable Toy), Microfiber Storage Bag

INTRODUCING NOCO AIR15 - The next generation of portable tyre inflator air compressors utilizing advanced motor and airflow design with uncompromising performance for tires up to 33-inches. It runs longer, fills faster, and infinitely better.

JACK HANDLE, ALL STEEL, 1" Ø X 30" LONG SUITS SIMPLEX 85A (RJ85A) JACK

JACK HANDLE, ALL STEEL, 1-1/4" Ø X 30" LONG SUITS A1022 & DUFF NORTON 1022 0050/571059

31mm M42 Rail Cutter Long Series

30mm M42 Rail Cutter Long Series

21mm M42 Rail Cutter Long Series

20mm M42 Rail Cutter Long Series