• Conforms to BS8020 : 2011
• Keying Hammer Head - 10lb / 4.5kg
• Fiberglass Shaft
• Rubber Grip Handle
• Steel Protective Collar
• Overall Length - Approximately 92.5cm

Designed for use to facilitate the removal of old insulating pads from rail and sleepers.

Designed for use to facilitate the removal of old insulating pads from rail and sleepers.

Cat No; Reference: 0039/42900 The PANSETTER is suitable for all Network Rail Sleepers fitted with PR, e & e-PLUS. Used for lifting the sleeper to the rail foot. It pushes the rail over, leaving the correct gap between the rail foot and the Pandrol housing, so that the insulator can be easily placed in the correct position. All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use.

Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool.

• Tongs used for the safe manual handling and moving of Steel Sleepers.
• Built to be both durable and robust, they allow the rail worker to use them to re-position and remove steel sleepers as required.
• Insulated to BS8020.

• Tongs used for the safe manual handling and moving of Steel Sleepers.
• Built to be both durable and robust, they allow the rail worker to use them to re-position and remove steel sleepers as required.

A durable, insulated wheelbarrow fabricated from a rugged single mould polyethylene material ideal for use on rail possessions and also utilities. 

• The STEL Insulated Wheelbarrow has a puncture proof tyre, also a double skin with 6mm walls made of Polyethylene to ensure maximum durability.
• No metal core parts are used resulting in the insulated wheelbarrow being a safer option for use in areas where conductivity may be an issue.
• The STEL insulated wheelbarrow is commonly used on or around 3rd rail / conductor rail working environments for safer working within possession zones.
• The STEL insulated wheelbarrow is also used for the application of cable laying.
• Our insulated wheelbarrow is robust with re-enforced handles and an extra strong tipping bar located in front of the wheel.
• Designed for the outside, the insulated wheelbarrow is rust free with a one piece mould construction resulting in fewer stress points.

• Capacity:      90L / 20 Gallon (Approx)
• Weight:        12kg (Empty)
• Dimensions: Length: 1540 x Width: 615 x Height: 620mm

Require more than one unit? Please call or email our sales office to request a quotation with respect to a multiple purchase discount.

Enquire today - Tel: 0114 383 0110 or email: sales@specialisedtools.co.uk

The key features of this range include: 1) Construction: Cast metal case with rubberised feet so the product doesn't "walk" when operated. 2) Performance: Experience the unparalleled speed and efficiency of powerful motors that seamlessly inflate tyres in astonishingly swift times (varies by product). Or quickly top off (35-40 PSI) low tires in seconds. 3) Accuracy: An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy 4) Emergency: An ultra-bright 60 lumen LED flashlight with 6 light modes, including SOS emergency modes. 5) Interface: A digital display allows accurate pressure settings, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. ULTRAFAST INFLATION — Experience the unparalleled speed and efficiency of a 280-watt motor seamlessly inflating tyres from 0 to 40 PSI in an astonishingly swift 2.5 minutes. Or quickly top-off low tyres (35-40 PSI) in less than 25 seconds. RUN LONGER — Its superior duty cycle simply does more work than comparable tyre inflators by allowing continuous operation for 15 minutes. Coupled with its fast inflation, it can fully inflate five tyres from 0-40 PSI in one duty cycle. SMART PRESSURE — An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy. INTUITIVE INTERFACE — A digital display allows accurate pressure settings from 15 to 100 PSI, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. WHAT'S IN THE BOX — AIR20 20-Amp Tyre Inflator Air Compressor with 1-Meter Braided Inflation Hose and a 6-Meter Power Cord with Battery Clamps, Multiple Adapters (Presta Valve, Needle, and Inflatable Toy), Microfiber Storage Bag

The key features of this range include: 1) Construction: Cast metal case with rubberised feet so the product doesn't "walk" when operated. 2) Performance: Experience the unparalleled speed and efficiency of powerful motors that seamlessly inflate tyres in astonishingly swift times (varies by product). Or quickly top off (35-40 PSI) low tires in seconds. 3) Accuracy: An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy 4) Emergency: An ultra-bright 60 lumen LED flashlight with 6 light modes, including SOS emergency modes. 5) Interface: A digital display allows accurate pressure settings, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. ULTRAFAST INFLATION — Experience the unparalleled speed and efficiency of a 138-watt motor seamlessly inflating tyres from 0 to 40 PSI in an astonishingly swift 3.8 minutes. Or quickly top-off low tyres (35-40 PSI) in less than 41 seconds. RUN LONGER — Its superior duty cycle simply does more work than comparable tyre inflators by allowing continuous operation for 25 minutes. Coupled with its fast inflation, it can fully inflate six tyres from 0-40 PSI in one duty cycle. SMART PRESSURE — An integrated pressure sensor and innovative dwell technology pause and resume inflation as the pump reaches its set pressure. It automatically shuts off while monitoring and measuring pressure without over-inflating, providing precision accuracy. INTUITIVE INTERFACE — A digital display allows accurate pressure settings from 15 to 60 PSI, selection between PSI, kPa, and bar pressure measurements, and selection of various flashlight modes, including SOS. Or, utilize the manual mode for applications below 15 PSI. WHAT'S IN THE BOX — AIR10 10-Amp Tyre Inflator Air Compressor with 1-Meter Braided Inflation Hose and a 3-Meter Power Cord with a 12V Cigarette Lighter Plug, Multiple Adapters (Presta Valve, Needle, and Inflatable Toy), Microfiber Storage Bag