PANDROL No. LP7632 Especially for e2001 and e2007clips but NOT for 4-shoulder baseplates. NOTE hook positions for max efficiency: Upper pivot: Clip installation Lower pivot: Clip extraction All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use. Installation Instructions ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER

Used in conjinction with both the EVSR & FVSR stressing rollers

TONGS FOR NWR CONCRETE CROSSING BEARER URLT/023118 0039/068275

Rail Roller system is designed manufactured to assist in the handling, moving and positioning of rail lengths.

STRESSING ROLLER, E-CLIP, UNDER / BOTTOM

BS8020 Insulated Fibreglass Pick Shaft. Pultruded fibreglass core with an injection moulded polypropylene outer. BS Standard 3'' x 2'' eye. Tested and made in conformance with BS8020:2011. Tools for live working. This shaft is designed to be a tap on fit, however when fitting a replacement shaft, the eye should be dressed to suit the hammer head by a competent person.

6000 Lumens li 6000 Lumens light output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available) ght output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available)

Impact Socket Bi-Square 1-1/8" x 1" Drive

A Network Rail approved compact marker board, to denote a work site within a possession. PADS No; 0020/039499 Powered by 2No “C” cell batteries. Automatic On/Off operation—No keys to use or loose! Size 400mm x 240mm Complies with NWR Group Standard GIRT/7033 Issue 2 Supplied with batteries

ROLLER USED IN STRESSING OPERATIONS SUITABLE FOR E & SHC CLIP