Loncin LC2000i 110V inverter generator is the perfect machine when 110V is a requirement, it's lightweight, reliable and powerful.
Low emissions with a low noise level of 61 dBA @7m Delivers spike free poier for sensative appliances 7hrs run time.
Compact and lightweight at only 21KG Run machines in parallel for additional power 1.6kW rated power output FEATURES & BENEFITS Engine single cylinder, 4 stroke, forced cooling OHV (LC148F) Fuel Capacity 4.2 ltr Displacement 79 cc Starting System Recoil Running Time 7 hrs Rated Voltage 230 volt Noise (≤ 7m 61dBA Dimensions (L x W x H mm) 499 x 285 x 455 mm Net Weight 21 kg Rated output hp / kW 2.1 / 1.6

Please Call For Parts List 0114 383 0110 or Email sales@specialisedtools.co.uk

Please Call For Parts List 0114 383 0110 or Email sales@specialisedtools.co.uk 

OUTPUT: 3.4kVA / 2.7kW
SOCKETS: 1 x 16a 115v / 1 x 32a 115v / 2 x 16a 230v
ENGINE: Honda GX200
HP/CYLINDERS: 6.5 / 1
START: Recoil
FUEL TANK: 3.1 Litres
RUN TIME: 2.5 Hours
NOISE LEVEL: 71dBA @ 7 metres
DIMENSIONS: L610 x W420 x H415mm
WEIGHT: 36 KG
OPTIONS: Single voltage, LPG conversion, Long run tank (metal), Trolley kit.

The Karcher Xpert range are robust, reliable Karcher professional pressure washers specially designed for the rigours of trade & construction use.

The Xpert OneTen HD 7125 features tough components throughout, including a brass cylinder head & water inlet, 10m heavy duty wire-braided antikink hose & stainless steel pistoms & spray lance.

Thanks to its 1.4kW motor, the Xpert OneTen provides a max pressure output of 110 bar, enabling you to quickly & easily blast dirt away from the cleaning surface. The detergent intake hose also allows you to apply chemical through the machine, helping to remove any stubborn / ingrained dirt.

The Karcher Xpert range now features the EASY!Force tigger gun, giving you the power to use the high pressure output with ease.

The revolutionary operating concept of the EASY!Force trigger gun uses the recoil force of the high pressure jet & reduces the holding force for the trigger to zero, ensuring more effortless, ergonomic & stress-free use.

In addition the Xpert OneTen also features Karcher’s patented EASY!Lock quick locks, meaning connection is quick and easy, 5 times faster compared with conventional screw connections whilst remaining just as durable & robust. The Xpert OneTen will also feature a stainless steel spray lance, EASY!Force trigger gun & triple nozzle.

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.

HAND SANITISER, 60ML, PACK QTY 112 ALCHOHOL BASED LIQUID

• Minimum Space Required in Vehicle
• Support Arm Works as Stabiliser during Loading and Unloading
• Reduce potential injury and fatigue to operator
• Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
• Safe and efficient method of transporting tools and smaller plant equipment to worksite
• Width - 360mm
• Length - 870mm
• Height - 190mm (without push handles fitted)
• Height - 820mm (with push handles fitted)
• Weight - 13.6kg (without push handles fitted)
• Weight - 17.8kg (with push handles fitted) 
• Safe Working Load - (NWR Spec) 250kg
• Safe Working Load - (LU Spec) 75kg
• BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
• RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.

For effortless manoeuvring in the garden: the lightweight and extremely manoeuvrable battery lawn mower LMO 18-33 Battery Set including battery and fast charger.

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180