• Fuel and Fume Free Creating An Eco Friendly Drilling System
• Supplied With A Robust Carry Case, 59 Minute Fast Charger, Jigs, Pump Bottle, 2 x M18 Volt Fuel 9Ah Milwaukee Li-ion Batteries as Standard, LED Battery Status Indicators (optional in car charger available)
• Low Vibration (1.69 m/s2)
• Low Noise Level (82.5 dBA)
• Light Weight; 16.6Kg Including Battery and Handle
• Tool Free Detachable Handle for Left or Right Hand Operation
• Quick Tool Free Cutter Change
• Ergonomically Friendly Slim Profile For Easy Carrying
• Compatible With Most Popular Rail Shoes / Templates
• Brand - Steltools.co.uk

K1270 RAILSAW, 14" C/W ATTACHMENT & CASE NWR SPECIFICATION

Designed to be used singularly or in pairs, for the lifting and transportation of lengths or rail, or parts of points and crossings from one location to another. The Ironman can also be used to transpose rail from one side of the track to the other. Therefore by straddling the running rails, access to the four-foot, six-foot and cess is possible.

Designed to be used singularly or in pairs, for the lifting and transportation of lengths or rail, or parts of points and crossings from one location to another.

The Ironman can also be used to transpose rail from one side of the track to the other. Therefore by straddling the running rails, access to the four-foot, six-foot and cess is possible.

POA

Super class 3-phase cold water pressure washer for continuous operation in tough operating conditions. With built-in high-pressure hose reel.

Proven Kärcher quality
4-pole water-cooled electric motor.
Robust brass cylinder head and ceramic pistons.
Reinforced, unbreakable plastic chassis.

Hose storage
Supported on both sides; for 20 m high-pressure hose.
Hose guide passes under the unit; high stability.
For fast, convenient fitting and removal.

For increased safety
Integrated electronics for unit monitoring.
Automatic switch-off in case of undervoltage or overvoltage.
Switches off in case of leaks or phase failure.

Outstanding mobility
Large rubber tyres for negotiating uneven surfaces, stairs and landings.
Proven sack trolley principle for easy, ergonomic transport.

Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks.
At last – work without getting tired: the EASY!Force high-pressure gun.
EASY!Lock quick-release locks: durable and robust. And five times faster than screws.

PLEASE CALL FOR PRICE, AVAILABILITY AND LEAD TIME - 0114 383 0110

Designed to be used as a manual propelled, stand-alone load-bearing rolling platform for use on the rail track. Each trolley is equipped with a fail safe braking system and is supplied with detachable Brake and Push Handles. The Split Trolley has been designed to be split into two halves to aid with manual handling and transporting to and from site.

Designed to be used as a manual propelled, stand-alone load-bearing rolling platform for use on the rail track. Each trolley is equipped with a fail safe braking system and is supplied with detachable Brake and Push Handles. The Split Trolley has been designed to be split into two halves to aid with manual handling and transporting to and from site.

Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.

• An innovative removable rechargeable battery system is used giving extended battery life. 
• A battery is supplied with each new unit. 
• Single or 5 way intelligent chargers are available that allow the battery packs to be left on charge all the time, without over charging, enabling battery packs to be ready for use at all times.

DATA SHEET

The Link Trolley supplied by STEL is used on the Network Rail (NWR) and London Underground (LUL) infrastructure. The Link Trolley is used for carrying heavy loads of tools and equipment accross the rail tracks to accomodate track maintenance operations.

PLEASE CALL FOR PRICE, AVAILABILITY AND LEAD TIME - 0114 383 0110

PLEASE CALL FOR PRICE, AVAILABILITY AND LEAD TIME - 0114 383 0110

Designed to be used as a manual propelled, stand-alone load-bearing rolling platform for use on the rail track. Each Link Trolley is equipped with a fail safe braking system and is supplied with detachable Brake and Push Handles. Up to three Link Trolleys can be connected together.

Loncin LC2000i 110V inverter generator is the perfect machine when 110V is a requirement, it's lightweight, reliable and powerful.
Low emissions with a low noise level of 61 dBA @7m Delivers spike free poier for sensative appliances 7hrs run time.
Compact and lightweight at only 21KG Run machines in parallel for additional power 1.6kW rated power output FEATURES & BENEFITS Engine single cylinder, 4 stroke, forced cooling OHV (LC148F) Fuel Capacity 4.2 ltr Displacement 79 cc Starting System Recoil Running Time 7 hrs Rated Voltage 230 volt Noise (≤ 7m 61dBA Dimensions (L x W x H mm) 499 x 285 x 455 mm Net Weight 21 kg Rated output hp / kW 2.1 / 1.6

Please Call For Parts List 0114 383 0110 or Email sales@specialisedtools.co.uk

• Graphite cast iron load sheave
• Hand lever made of malleable cast iron or tubular steel model with rubber grip
• Automatically acting load pressure brake
• Free chaining device optional
• Drop forged load and suspension hooks
• Asbestos-free friction discs

Yale Hand Lever Hoists are versatile, portable units for pulling, tensioning, lashing and lifting loads. The operation of the Hand Lever Hoists is easy and safe.
Light weight, robust malleable cast iron model, free chaining, slip clutch, stamped steel - or aluminium housing, low operating effort - in the Yale product range you will always find an optimal hoist for every type of operation.
The brake system of all Yale hand lever hoists are based on the original Yale patent of the British Engineer Thomas A Weston dating back to 1875. All parts of the load brake are made of high quality materials and are protected against corrosion.
The graphite cast iron load sheave for the link chain has precision machined chain pockets for accurate fit and durability of the load chain. The roller chain sprocket is made from heat treated chromium-molybdenum steel with precision machine teeth to ensure smooth chain movement.
Every Yale ratchet lever hoist is factory tested with overload. The units are supplied with a test certificate showing the serial-No. Operating instructions which contain an EC declaration of conformity are also attached to each unit.

Please Call For Parts List 0114 383 0110 or Email sales@specialisedtools.co.uk 

OUTPUT: 3.4kVA / 2.7kW
SOCKETS: 1 x 16a 115v / 1 x 32a 115v / 2 x 16a 230v
ENGINE: Honda GX200
HP/CYLINDERS: 6.5 / 1
START: Recoil
FUEL TANK: 3.1 Litres
RUN TIME: 2.5 Hours
NOISE LEVEL: 71dBA @ 7 metres
DIMENSIONS: L610 x W420 x H415mm
WEIGHT: 36 KG
OPTIONS: Single voltage, LPG conversion, Long run tank (metal), Trolley kit.

The Karcher Xpert range are robust, reliable Karcher professional pressure washers specially designed for the rigours of trade & construction use.

The Xpert OneTen HD 7125 features tough components throughout, including a brass cylinder head & water inlet, 10m heavy duty wire-braided antikink hose & stainless steel pistoms & spray lance.

Thanks to its 1.4kW motor, the Xpert OneTen provides a max pressure output of 110 bar, enabling you to quickly & easily blast dirt away from the cleaning surface. The detergent intake hose also allows you to apply chemical through the machine, helping to remove any stubborn / ingrained dirt.

The Karcher Xpert range now features the EASY!Force tigger gun, giving you the power to use the high pressure output with ease.

The revolutionary operating concept of the EASY!Force trigger gun uses the recoil force of the high pressure jet & reduces the holding force for the trigger to zero, ensuring more effortless, ergonomic & stress-free use.

In addition the Xpert OneTen also features Karcher’s patented EASY!Lock quick locks, meaning connection is quick and easy, 5 times faster compared with conventional screw connections whilst remaining just as durable & robust. The Xpert OneTen will also feature a stainless steel spray lance, EASY!Force trigger gun & triple nozzle.

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.

HAND SANITISER, 60ML, PACK QTY 112 ALCHOHOL BASED LIQUID

CLAMP, SUITS 130 LB CONDUCTOR RAIL (64KG)

• Minimum Space Required in Vehicle
• Support Arm Works as Stabiliser during Loading and Unloading
• Reduce potential injury and fatigue to operator
• Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
• Safe and efficient method of transporting tools and smaller plant equipment to worksite
• Width - 360mm
• Length - 870mm
• Height - 190mm (without push handles fitted)
• Height - 820mm (with push handles fitted)
• Weight - 13.6kg (without push handles fitted)
• Weight - 17.8kg (with push handles fitted) 
• Safe Working Load - (NWR Spec) 250kg
• Safe Working Load - (LU Spec) 75kg
• BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
• RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.

A great value bundle to see you through the frosty weather this winter. The site winter essentials kit includes:

•1 x 250kg Grit Bin •1 x Mobile Salt Spreader / 27kg Capacity •8 x Brown / white Rock Salt Bags 23/25kg

diamondcord 164 Feet by 5.5 mm Unbreakable Petrol/Diesel Engine Pull Starter Recoil Replacement Cord Rope Bulk Spool for Snow Mobiles and Winch Line Rope

For effortless manoeuvring in the garden: the lightweight and extremely manoeuvrable battery lawn mower LMO 18-33 Battery Set including battery and fast charger.

A Network Rail approved compact marker board, to denote a work site within a possession. PADS No; 0020/039499 Powered by 2No “C” cell batteries. Automatic On/Off operation—No keys to use or loose! Size 400mm x 240mm Complies with NWR Group Standard GIRT/7033 Issue 2 Supplied with batteries

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180

TYPE FAST CLIP FC EXTRACTOR - FRANCE TYPE FASTCLIP FC OUTIL MANUEL D'EXTRACTION

• A Network Rail approved compact and lightweight Possession Limit Board with integral rail top clamp.
• Tilt Switch Operation - No keys to use or lose
• LED Light - Flashing Day and Night
• Powered by 2 No "C" cell batteries
• Weight - 2kg

DATA SHEET

All-purpose vacuum cleaner built for demanding cleaning applications.

Cartridge filter with float
Large cartridge filter ensures constant high suction power. The float system interrupts the suction flow after reaching the maximum capacity.

Robust bumper
A bumper protects the vacuum as well as walls, machines and other items against damage.

Robust metal latches
The extremely robust metal latches lock more reliably.

Simple to use, versatile and perfect for tree maintenance: the lightweight CNS 18-30 Battery chain saw with tool-less chain tensioning system. 

This product does not include a battery or charger.

CLAMP, UNIVERSAL, USED IN CONJUNTION WITH STEL IRONMEN,SUITABLE FOR USE ON UIC60, 113LB & BULLHEAD, RAIL TESTED TO 1500KG

Battery and fast charger included: the battery-powered hedge trimmer HGE 18-50 Battery Set. Its 180° rotating handle and the cuttings sweeper ensure convenient hedge cutting.

DATA SHEET

CLAMP SUITABLE FOR U69 CHECK / UIC33 RAIL BODY ONLY, NO CHAIN LINK/SHACKLE

3500 LUMEN RECHARGEABLE SMD SITE LIGHT WITH REMOVEABLE BATTERY
USB POWER BANK FACILITY
BATTERY LEVEL INDICATOR
STRONG MAGNETIC FEET 

240v UK MAINS CHARGER (INC) 

DATA SHEET

EXTRACTOR, FASTCLIP FC, STEL, CREAM/GREEN 0039/047851

INSTALLER, FASTCLIP FC, STEL VIPA-SP, SFC YELLOW / GREEN 0039/047850

DATA SHEET

The WVP 10 Adv is a lightweight, handheld, battery operated wet surface cleaner which provides the ideal solution for cleaning all flat surfaces, providing a streak free cleaning solution.

Lightweight, ergonomic and universal
Suitable for all types of smooth surfaces − horizontal, vertical or even overhead.
Comfortable handling and easy to operate.
Safe, easy handling thanks to rubber handle.

Removable, replaceable battery
Allows external battery charging and, in conjunction with a spare battery, uninterrupted working.
Charging state is displayed by 3 LEDs above the ON/OFF switch.

Convenient cleaning of edges
Streak-free cleaning results right up to the edges thanks to the manually adjustable spacer.

Large volume of dirty water tank
Reduces work interruptions thanks to frequent emptying, thus increasing productivity.

WVP 10 Adv version with quick charger
The quick charger and second battery enable almost entirely uninterrupted cleaning.

WVP 10 Adv version with additional narrow suction nozzle
Especially suited to small areas which are not accessible with the standard nozzle.

Powerful lithium-ion battery
Enables work periods of around 30 minutes at a time.

Insulated Type E Clip & PR Clip Pan Puller

Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool.

Data Sheet

Rear Arch Extraction Tool

• Hi-Vis Chainsaw Trousers (XL)
• Elasticated waist
• Stretch Material in crotch for easy movement
• 1 x velcro back pocket
• 1 x velcro side pocket
• Type C CLASS 1 Protection Conforms to EN381-5 20m/s
• EN471 : 2004 class 2
• Internal side seem to prevent snagging
• Zip fly
• Eight layers of all round protection
• Buttons for braces and kidney flap for comfort
• Ultra light pro trouser
• Reflective hi-viz stripes 7cm

DATA SHEET

Hand-tools for PANLOCK and Elastic Spikes.

Hammers should NEVER be used for either insertion or extraction of PANLOCK.

Hammers may be used for the loosening of rusty PANLOCK, but NOT to fully extract.

Hammers can be used for the insertion of elastic spikes.

Available from Tool and Steel.

This tool is supplied with separate and detailed operating instructions.

Insulated Type E Clip Pan Setter

• Schwihag Bar
• Used for inserting an extracting Schwihag clips

DATA SHEET

6000 Lumens li 6000 Lumens light output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available) ght output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available)

The all-rounder for crisp lawn edges, ergonomic work and easy access in corners: the battery-powered LTR 18-30 Battery lawn trimmer set. Incl. battery and fast charger.

3500 LUMEN RECHARGEABLE SMD SITE LIGHT WITH REMOVEABLE BATTERY
USB POWER BANK FACILITY
BATTERY LEVEL INDICATOR
STRONG MAGNETIC FEET 

240v UK MAINS CHARGER (INC) 

INSULATED TROUGH LID LIFTER / TILTER, ADJUSTABLE

Diamondgrip Pull Cord Spool 3.6mm x 164ft

DATA SHEET

• Tongs used for the safe manual handling and moving of Steel Sleepers.
• Built to be both durable and robust, they allow the rail worker to use them to re-position and remove steel sleepers as required.
• Insulated to BS8020.

No. AE17256 formerly No. LP15923

Colour: White

The tool is used with the eP20129 green or eP20130 yellow e-PLUS clips, mostly with RT60 and NR60 S&C layouts.

The battery-powered LTR 18-25 Battery lawn trimmer as a set, including battery and battery charger. Ultra-light, ergonomic to grip and easy to operate.

Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.

The VSR is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

https://unilite.co.uk/wp-content/uploads/2021/07/HL-11R-Data-Sheet.pdf

The Vortok Fastclip Stressing Roller is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

A durable, insulated wheelbarrow fabricated from a rugged single mould polyethylene material ideal for use on rail possessions and also utilities. 

• The STEL Insulated Wheelbarrow has a puncture proof tyre, also a double skin with 6mm walls made of Polyethylene to ensure maximum durability.
• No metal core parts are used resulting in the insulated wheelbarrow being a safer option for use in areas where conductivity may be an issue.
• The STEL insulated wheelbarrow is commonly used on or around 3rd rail / conductor rail working environments for safer working within possession zones.
• The STEL insulated wheelbarrow is also used for the application of cable laying.
• Our insulated wheelbarrow is robust with re-enforced handles and an extra strong tipping bar located in front of the wheel.
• Designed for the outside, the insulated wheelbarrow is rust free with a one piece mould construction resulting in fewer stress points.

• Capacity:      90L / 20 Gallon (Approx)
• Weight:        12kg (Empty)
• Dimensions: Length: 1540 x Width: 615 x Height: 620mm

Require more than one unit? Please call or email our sales office to request a quotation with respect to a multiple purchase discount.

Enquire today - Tel: 0114 383 0110 or email: sales@specialisedtools.co.uk

Cat No; Reference: 0039/42900 The PANSETTER is suitable for all Network Rail Sleepers fitted with PR, e & e-PLUS. Used for lifting the sleeper to the rail foot. It pushes the rail over, leaving the correct gap between the rail foot and the Pandrol housing, so that the insulator can be easily placed in the correct position. All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use.

• Power ; 40W - 4000 Lumens
• Bulb Type ; 16 X 3W Bridgelex LED
• LED Life ; 50000H
• Battery Type ; 7.4V / 13200mAh Rechargeable Li-Ion Battery
• Runtime ; 4 Hours (High Output Mode, 8 Hours Low Output Mode)
• Charging Time ; 4 - 5 Hours
• Input Voltage AC : 100-240V , DC ; 12 - 24V
• Interface ; USB Interface For Charging Devices
• Magnetic ; 4 PCS Strong N40 Magnetic Base
• Dimensions; 160 x 139 x 31MM
• Material ; Aluminium
• 4 Modes ; 100% - 50% - Sos - Flashing
• 4 Power Indicator Lights ;
• All four lights on 100 - 75%
• Red, Yellow And Green Lights On 75 - 50%
• Red And Yellow Lights On 50 - 25%
• Red Light On 25 - 5%
• Red Light Flashing <5%

Lighting long stretches of road, rail track or tunnel is now easier and more efficient than ever with the STEL Lucia link light.

• The STEL Lucia LED portable link lighting is perfect for use in the rail industry and construction industry for temporary lighting of access and maintenance projects such as  long stretches of motorway and rail.
• The STEL Lucia LED portable link lighting avoids the expense of bulky lighting equipment with excellent cost savings against tower lights.
• The STEL Lucia LED portable lighting will provide over 500 metres of efficient lighting from a small single 3KVA generator.

Specification:

• Input Voltage: AC 100 - 240 V
• Input Frequency: 50 - 60 h
• Safety Level: Class 1
• Rated Power: 30 Watt
• Lamps Lument: 3600 lms
• Whole Light Angle: 180 °
• Working Temperature: -22°C / +55°C
• Lighting IP Rating: IP67
• Plug IP Rating: IP44
• LED Lifetime: 30,000 hrs
• Size: 64cm x 11cm x 6.5cm
• Weight: 1.3 KG

Please note light mast,basket and extension sold seperately.

Part Codes:

• Lucia LED Light - Code: 410000
• Lucia LED Light Mast: 410024
• Lucia LED Light Basket: 410027

• Temporary Speed Repeater Warning Board
• Dimensions:
• 560mm x 660mm

A true all-rounder: the battery-powered LTR 18-30 Battery lawn trimmer is ergonomically designed for comfortable work, easily reaches every corner and guarantees crisp, clean lawn edges.
This product does not include a battery or charger.

All lined up: The battery-powered GSH 18-20 Battery 2-in-1 grass & shrub shears cut lawn edges with precision and trim shrubs into elegant shapes. For precision cutting results.
This product does not include a battery or charger.

750 LUMEN CREE LED USB RECHARGEABLE HEADLIGHT WITH LI-ION BATTERY PACK WITH RED LIGHT, MICRO-USB CABLE - 2x 3.7v 2000mAh LI-ION BATTERIES (INC) - COMES IN ZIPPED BLACK STORAGE CASE 

• Manufactured by Klingspor, the Kronoflex A24 SX special is used extensively throughout the UK Rail Industry.
• Type 41
• Grade A24 – S-BF
• Aggressive fast / free and clean cutting
• Blotters attached
• Disc size 350mm Ø x 4mm x 25.4mm (bore) – (14” x 5/32” x 1” bore)
• Maximum rpm: 5500rpm

DATA SHEET

• Temporary Bullseye Speed Restriction Board

Insulated Check Rail Spanner - 1-11/16" AF x 30" L
Insulated to BS8020

DATA SHEET

Insulated Ferrule Extractor

1 11/16" Bi-Square Fishplate Nut Spanner
36" BS8020 Fibreglass Insulated Shaft

• Conforms to BS8020 : 2011
• Keying Hammer Head - 10lb / 4.5kg
• Fiberglass Shaft
• Rubber Grip Handle
• Steel Protective Collar
• Overall Length - Approximately 92.5cm

Insulated Hook Switch Pole
Insulated to BS8020

Insulated Simplex A17 Jack Handle
Insulated to BS8020

RatGate is a non-return device that allows waste water to flow out of your home but helps preven rats from gaining entry.

• Easy to install - Only basic tools are required to install a RatGate
• Universal Fit - Available in 4" 110mm, 6" 160mm and 9" 225mm versions that it clay, plastic and cast iron drainage pipe
• Tough Construction - Made from high grade laser cut stainless steel
• Maintenance Free - Once the device is installed there is no maintenance required other than a periodic check
• Multi-Directional - Can be fitted in either the up or down stream direction of flow
• Accessible - The RatGate includes a liftable flap mechanism, providing easy access for drain maintenance
• Enviromentally Friendly - The device is humane, poison free and enviromentally friendly

• Insulated Pot Dolly Hexagon 17mm For Concrete

https://unilite.co.uk/wp-content/uploads/2021/07/SLR-1750-Data-Sheet.pdf

450 LUMEN CREE LED HEADLIGHT WITH SPOT & FLOOD LEDs - HYBRID BATTERY PACK - 1 x 2600mAh 18650 LI-ION(INC) AND TAKES 2 x AA BATTERIES (NOT INC) C/W ZIPPED WET SUIT MATERIAL STORAGE POUCH

DATA SHEET

Rail Roller system is designed manufactured to assist in the handling, moving and positioning of rail lengths.

Insulated Keying Hammer - 7lb
Insulated to BS8020

https://unilite.co.uk/wp-content/uploads/2021/07/IL-SIG1-Data-Sheet.pdf

1250 LUMEN CRI "COLOUR-RENDER-INDEX"  INDUSTRIAL INSPECTION LIGHT WITH 3 LIGHT COLOURS PLUS UV FLOOD LIGHT AND WHITE LED TOP TORCH - RECHARGEABLE WITH CHARGING DOCK AND TYPE-C USB CABLE 

https://unilite.co.uk/wp-content/uploads/2021/07/HX1500R-Data-Sheet.pdf

• Tongs used for the safe manual handling and moving of Steel Sleepers.
• Built to be both durable and robust, they allow the rail worker to use them to re-position and remove steel sleepers as required.

Rail Turning Bar - Insulated Bull Head
Insulated to BS8020

ATEX - 225 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 1m SUB. HEADLIGHT 3 x AAA (NOT INC)

DATA SHEET

Insulated 7lb Sledge Hammer
Insulated to BS8020

DATA SHEET

DATA SHEET

ATEX - 350 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE RIGHT ANGLE TORCH IP54 4 x AA (NOT INC)

DATA SHEET

• Conforms to BS8020
• Certified to 1000 Volts - Tested to 10000 Volts
• Solid forged from one piece of steel
• YD handle
• Strong yet lightweight fibreglass shaft has excellent insulating properties

Insulated Post Hole Digger Shovel Holder

46" HANDLE 

68" OVERALL LENGTH

• Emergency Serviceable G Clamp
• Suitable for Common Rail Profiles
• 95RBS BH/97.1/2 BH, 109/BS110A/BS113A FB, CEN60 E1/E2

JACK HANDLE, INSULATED DUFF NORTON TRIP 117A

DATA SHEET

DATA SHEET

CABLE GUIDANCE TOOL, 37", INSULATED, USED IN CONJUNCTION WITH TROUGH LID LIFTER

350 LUMEN SMD LED DUAL POWER HELMET MOUNTABLE HEADLIGHT WITH LI-ION BATTERY PACK, MICRO-USB LEAD, AAA BATTERY CASE, 3M ADHESIVE HELMET MOUNT 

DATA SHEET

• Rail Tongs manufactured from forged steel.
• Designed to accommodate a range of rail sections.
• Hi-Vis Yellow

SUMO, BUILDERS / FENCING INSULATED SPADE 54" LONG HANDLE, OVERALL LENGTH 72" HEAD SIZE 5-1/2" X 14" LONG

Insulated Chisel End Crowbar

Insulated 1.5M Point End Crowbar

• Insulated Point End Crowbar
• Insulated Solid Fibreglass Shaft
• Conforms to BS8020
• Rubber Grip for Extra Comfort
• 32MM Ø X 57" Long

Insulated Heel End Crowbar

Jack Handle - Pan Jack, Toe Jack, Zwicky / Kenhi

DATA SHEET

Double Head Tripod For Hexagon Site Lights

1000 LUMEN COMPACT WORK LIGHT WITH 300 LM TOP TORCH AND FOLDING MAGNETIC HANDLE/STACK/HOOK - 3.7v 5200mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

https://unilite.co.uk/wp-content/uploads/2021/07/HX-800R-Data-Sheet.pdf

Track Magnet Key

Great for indoor and outdoor use with easy carry strap.
Spill Kit Contents;

• 30 x Premier 50cm x 40cm Pads
• 3 x Premier 1.2 Metre Socks
• 3 x 38cm x 23cm Absorbent Pillows, 5 waste bags & ties.

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

https://unilite.co.uk/wp-content/uploads/2021/09/IL-925R-Data-Sheet.pdf

SHC De-Clipping Bar

Replacement Geismar MC3 Frog Stone 254MM X 40MM X 76MM, RECESS 12MM X 166MM

Single Head Tripod For Hexagon Site Lights

450 LUMEN CREE LED USB RECHARGEABLE ALUMINIUM FLASHLIGHT WITH BELT POUCH AND WRIST STRAP - REMOVABLE 3.7v 800mAh 14500 LI-ION BATTERY

DATA SHEET

200 LUMEN CRI "COLOUR-RENDER-INDEX" COB LED INDUSTRIAL IK07 SENSOR HEADLIGHT LIGHT WITH 3 COLOURS - 3.7v 1500mAh LI-PO INTEGRAL BATTERY - MICRO-USB CABLE (INC)

All Steel Extractor Ferrule

550 lumen white Nichia LED, 6500k ƒ Hard anodized die cast matte aluminium body ƒ Tactical rubberised micro switch operation ƒ 3 light mode settings and 8Hz defence strobe ƒ Flawless smooth reflector for long distance beam ƒ IP67 dust and waterproof - 1m submersible ƒ Impact resistant to 1m ƒ Built-in USB rubberised charging port cover ƒ Battery level and charging indicator LED ƒ 1A USB-C charging - fast 2 hours charge time ƒ High quality USB-C charging cable included ƒ Nylon velcro holster & safety nylon wrist strap

SHOVEL, RABBIT / POST HOLE INSULATED HEAD SIZE 5-1/2" X 12" LONG 54" HANDLE, OVERALL LENGTH 72"

475 LUMEN SENSOR HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT - 3.7v 1800mAh LI-PO INTEGRAL BATTERY (INC) C/W DRAWSTRING STORAGE POUCH 

ATEX - 150 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 3M SUB. FLASHLIGHT 4 x AA (NOT INC)

DATA SHEET

Anti-Bacterial Protection - Ideal for All Toilet Areas - Kills Listeria - E Coli and Salmonella - Flushable

• Anti-Bacterial protection
• Ideal for all toilet areas
• Kills 99.9% of Bacteria 
• Kills listeria, E.Coli and Salmonella
• Flushable

Carefully peel back label and use one wipe at a time. Reseal label after removing wipe to prevent drying out. Wipe surface for a more hygienic clean and allow surface to dry. Dispose of wipe with household waste. Wash hands after use.

• 1.8m Non Conductor Speed Board Post

625 LUMEN COB LED USB RECHARGEABLE INSPECTION LIGHT WITH TOP TORCH AND MAGNETIC BACK

https://unilite.co.uk/wp-content/uploads/2021/07/HL-8R-Data-Sheet.pdf

HAND HELD INFRARED THERMOMETER IR-801

Easy-to-use infrared thermometer with Class II laser sighting, ideal for non-contact measurement of surface temperatures. Suitable for food preparation, plant & general maintenance, HVAC, transport & automotive, asphalt, health & safety, diesel and eet maintenance.

Features:

• -50° to 350°C x 0.1°
• Measures °C or °F
• Point, pull the trigger and read the display
• Class II laser to identify the centre point of the area being measured
• Distance to spot size ratio is 13 to 1 at the focal point
• Fixed emissivity at 0.95
• Response time less than 500 milliseconds
• 25mm LCD display with backlight
• Automatic data hold when trigger released
• Min/max memory
• Auto power-off after 20 seconds of no activity
• Low battery indication
• Backlight and laser can be user disabled
• Impact-resistant ABS case 
• Supplied with battery: LR-61

Strong, Flexible Aluminium Foil Tape (50mm x 45m) on Silicon Paper Liner for use on Most Surfaces. Flame Retardant and Excellent Temperature Performance. UV-Resistant and Waterproof

ALL STEEL FENCING SPADE EXTENDED HANDLE 
HEAD SIZE 5 - 1/2" TAPER TO 4 - 1/2" X 11"
OVERALL LENGTH 65"

All Steel Pot Dolly Hexagon 19mm

• 110V, 20 Watt LED Twin Head Flood Light
• 110-240V - 50Hz
• LED Max 2 x 20W
• IP65 Rating
• 180° Swivel Head
• Cool White LEDs
• 5 Metre Cable

450 LUMEN CREE LED FOCUS ALUMINIUM FLASHLIGHT C/W WRIST STRAP AND IN A CLEAR HARDCASE DISPLAY BX - 4 x AAA DURACELL BATTERIES (INC)

DATA SHEET

325 LUMEN COB LED INDUSTRIAL IK07 SENSOR HEADLIGHT - 3.7v 1500mAh LI-PO INTEGRAL BATTERY - MICRO-USB CABLE (INC)

https://unilite.co.uk/wp-content/uploads/2021/07/IL-375R-Data-Sheet.pdf

DATA SHEET

• Cancelling Indicator Board

500 LUMEN COMPACT WORK LIGHT WITH 300 LM TOP TORCH AND FOLDING MAGNETIC HANDLE/STAND/HOOK - 3.7v 2000mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

275 LUMEN CREE LED USB RECHARGABLE HELMET MOUNTABLE HEADLIGHT WITH 2 x 5mm RED LEDs - 3.7v 1800mAh LI-POLYMER INTEGRAL BATTERY C/W DRAWSTRING STORAGE POUCH

DATA SHEET

Similar in design to the nine prong compost fork but more suited to heavy-duty work, the ballast fork is ideal for: Moving and loading stone, ballast and tarmac. Use by railway workers to transfer roadbed ballast.

ROLLER USED IN STRESSING OPERATIONS SUITABLE FOR E & SHC CLIP

A multi-purpose product which actively displaces water leaving an electrically non-conductive barrier
Penetrates rust and corrosion by capillary action, loosening rusted parts
Protects metal against rust and corrosion
Cleans away grease and grime
Leaves a protective film of lubricant
5 Litre Plastican with Spray Bottle

Safety Data Sheet -

Speed Board 5 Mph 390mm X 390mm

• Directional Indicator Board

• Spate Indicator Board

• Temporary Speed Restriction Board

SCRWC23 - 23mm

Genuine Rotabroach TCT Short Series Rail Cutter 23mm

• Termination Indicator Board

SCRWC21 - 21mm

Genuine Rotabroach TCT Short Series Rail Cutter 21mm

DATA SHEET

500 LUMEN CREE LED POLMER & ALUMINIUM INDUSTRIAL FLASHLIGHT IP68 - 2M SUBMERSIBLE & 2M DROP PROOF - 2 x AA DURACELL BATTERIES (INC)

JACK HANDLE A17 SIMPLEX @ 1200MM LONG WHITE ROUND METAL HANDLE, NEW VERSION

• Timber Nips used for the safe manual handling and movement of Timber Sleepers.
• A durable and robust tool

https://unilite.co.uk/wp-content/uploads/2021/07/IL-175R-Data-Sheet.pdf

The Kits Contains:

• 1 x Safety Helmet
• 1 x Set of Clip-on Ear Defenders. (SNR 23)
• 1 x Chin Strap
• 1 x Mesh Face Shield with Mount

Suitable for Forestry, Strimming, Agricultural and Chainsaw use.
Conforms to the following standards.

• EN397
• EN352-3
• EN166
• EN1731

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Terry Towelling Rags (10kg Bag) Ideal for cleaning and drying out surfaces

Solid Steel Crowbar with Heel & Point Ends - 1 1/8" Hexagonal X 5 Foot Shaft

Maxim Impact Wrench Auger Attachment

SCRWC20 - 20mm

Genuine Rotabroach TCT Short Series Rail Cutter 20mm

PAN PULLER, E PLUS, HOOKS CASE HARDENED TO 45-50 HRc PAINTED BLACK 0039/042742

Rail Turning Bar - Steel Bull Head

• Constructed from durable steel 
• Use on BS113A, UIC 60, S46 & S54 Rail Section
• Length - 1.4 meters

Slewing Jack Handle Only

27 LUMEN CREE LED ALUMINIUM INDUSTRIAL PENLIGHT - 2 x AAA DURACELL BATTERIES (INC)

Insulated Chisel & Point Crowbar/Digging Bar

• Insulated Heel & Point Crowbar
• 60" Insulated Solid, Non-Conductive Fibreglass Shaft with Forged Steel Ends
• Conforms to BS8020
• Quote MM0001 when ordering over the phone to receive our special price of £35 (exc vat)
• Tested up to 10000V
• Safe for up to 1000V 
• 1.5M 
• 6KG

200 LUMEN CREE LED HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT AND 2 x 5mm WHITE LEDs - 3 x AAA ENERGIZER (INC)

275 LUMEN SMD LED USB RECHARGABLE INSPECTION LIGHT WITH 250 LUMEN CREE TORCH IN TOP AND ROTATING MAGNETIC STAND - 3.7v 1600 mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

Replacement Geismar MP12 Grinding Stone

Katrin Foam Wash 1L 6 Per Case

Safety Data Sheet -

Thanks to the integrated wall bracket, the fast charger can be fixed to the wall very easily. The fast charger charges the 18 V/2.5 Ah Kärcher Battery Power exchangeable battery to 80% in just 44 minutes. It can also be used to charge all other 18 V Battery Power exchangeable batteries in the Kärcher 18 V Battery Power battery platform.

• Keying Hammer Head - 10lb / 4.5kg
• Hickory Handle
• Overall Length - Approximately 91.5cm

• Heavy Duty Digging Bar
• Hardened Steel
• 1.7 Metre overall length 

POLYFIBRE HANDLED CABLE LAYER SHOVEL TREADED, ONE PIECE HANDLE, 28"
PRODUCT SIZE; 5" X 4-1/2" X 11"

Solid Steel Crowbar with Chisel & Point Ends - 28mm Round X 1500mm Shaft

BLACK BEANIE HAT WITH 150 LUMEN QUAD SAMSUNG SMD LED USB RECHARGEABLE LIGHT - 3.7v 420mAh LI-POLYMER BATTERY

RAIL CUTTER, M2AL COBALT, SHORT SERIES, 32MM, GENUINE ROTABROACH

SCRWC22 - 22mm

Genuine Rotabroach TCT Short Series Rail Cutter 22mm

Efresh All in 1 Dish Wash Tablets (Qty 4 x 100)

PAVING MAUL, HARDWOOD HANDLE, RUBBER HEAD

• Conforms to BS8020
• Certified to 1000 Volts - Tested to 10000 Volts
• Solid forged from one piece of steel
• YD handle
• Strong yet lightweight fibreglass shaft has excellent insulating properties
• Lightweight at just 2.5kg
• BS8020:2011

BS8020 Insulated Fibreglass Pick Shaft. Pultruded fibreglass core with an injection moulded polypropylene outer. BS Standard 3'' x 2'' eye. Tested and made in conformance with BS8020:2011. Tools for live working. This shaft is designed to be a tap on fit, however when fitting a replacement shaft, the eye should be dressed to suit the hammer head by a competent person.

• Simplex A17 Jack Handle

Rail Handler Adaptor Link
For use with the Camlok Lifting Clamp.

The 20 Litre Black Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
•  Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

SCRWC19 - 19mm

Genuine Rotabroach TCT Short Series Rail Cutter 19mm

• 1.5 Metre GRP Light Mast
• Suits BW702D & DBL Light Head

SCRWC18 - 18mm

Genuine Rotabroach TCT Short Series Rail Cutter 18mm

Insulated Taper Mouth Shovel Treaded Shovel

Tested And Certified To BS8020:2011

Handle - 28" / 711mm

Blade Size - 10" Wide By 8.1/2" Tapering To 12.1/2" Long

Tested For Live Work Used for shovelling out or concrete mixing, working tarmac and cement, backfilling trenches and manouvering ballast.

Insulated Rabbit Shovel Treaded Shovel

Tested And Certified To BS8020:2011

Handle - 28" / 711mm

Blade Size - 7-1/2" Wide By x 11-1/2"

Tested For Live Work Ideal For Transplanting Plants And Shrubs And Also For Post-Holing Jobs

Insulated Clay Grafting Shovel Treaded Shovel

Tested And Certified To BS8020:2011

Handle - 28" / 711mm

Blade Size - 6" Wide By 12" Long T

ested For Live Work With a slightly dished blade and round cutting edge, designed for clay digging and heavy ground breaking.

Insulated Square Mouth Shovel Treaded Shovel

Tested And Certified To BS8020:2011

Handle - 28" / 711mm

Blade Size - 8" Wide By 10.1/2" Long

Tested For Live Work Used for shovelling out or concrete mixing, working tarmac and cement, backfilling trenches and manouvering ballast.

Insulated Newcastle Treaded Shovel

Tested And Certified To BS8020:2011

Treaded Tested For Live Work 16" Long, 7" Wide Tapering to 4"

Often known as a 'grafter' in some trades.

Designed for digging deep and narrow trenches, channels and post holes.

Insulated Treaded Round Mouth Shovel Shovel

Treaded

Tested And Certified To BS8020:2011

Handle - 28" / 711mm Blade Size - 10" Wide By 12.1/2" Long

Tested For Live Work

Used for excavating, diggiing and sovelling most aggregates. The pointed blade offers easier penetration in tougher ground.

Insulated Cable Laying Shovel Treaded Shovel

Tested And Certified To BS8020:2011

Handle - 28" / 711mm

Blade Size - 5" Wide Tapering to 4.1/2" By 11"

Long Tested For Live Work Often known as a '1-way' in some trades.

Designed for cable and pipe laying with a slim blade that is ideal for digging out narrow trenches.

Insulated Trenching Shovel Treaded Shovel

Tested And Certified To BS8020:2011

Handle - 28" / 711mm

Blade Size - 7" Wide x 11" Long

Tested For Live Work Often known as a '2-way' in some trades Used for digging and cleaning out narrow trenches for cable and pipe laying

STRESSING ROLLER, E-CLIP, UNDER / BOTTOM

RAIL CUTTER, M2AL COBALT, SHORT SERIES, 30MM, GENUINE ROTABROACH

• The Hi-Vis Quick Release Rucksack features fabric and reflective tape that meets the requirements of GO/RT 3279 & EN ISO 20471.
• The innovative quick release anti-entanglement system is designed as a protection device when working in hazardous conditions.
• Features include a secure, weatherproof MP3/CD and mobile phone outlet as well as padded straps and back panel for wearer comfort.
• 100% Polyester 600D Fabric
• 210T PA Coated Fabric
• Orange
• 25 Litre Capacity
• L28cm x W21cm x H43cm

E Clip Replacement Hook 0039/42743

WHITE COTTON RAGS - 10KG BAG

Wonder Wipes Multi-Use, formulated to clean hands, tools and surfaces from wet and semi-cured paint, sealant, adhesive, bitumen, expanding foam, oil, grease and even silicone

6 PACKS

250 LUMEN COMPACT FOLDING POCKET TORCH WITH 100 LUMEN TOP TORCH AND MAHNETIC ROTATING STAND WITH POCKET CLIP - 3 x AA BATTERIES (INC)

The LARGE-MAGNET is an ultra-robust steel and aluminium magnet to attach to a Unilite LED work light (SLR-1300, SLR-2500, SLR-2750, SLR-4750, SLR-4400, SLR-6000 & SP-4500). A secure locking wing nut is used to hold the site light securely in place.

Dimensions: 54mm W x 54mm L x 37mm H

Weight: 169g

Chrome Molybdenum Impact Extension Bar 1" square drive x 10"

Weight - 1.85Kg

250mm x 50mm

HEAVY DUTY CABLE REEL 110V 16AMP 25M X 2.5MM PRICE ON APPLICATION

The 20 Litre Green Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
•  Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

DC-USB CHARGING KIT FOR PS-RB2LION, PS-IL6R, IL-SIG1, PS-IL5R, PS-IL3R (WITH MULTI-COUNTRY PLUGS {UK, AUS &EU})

Impact Socket 41mm Hexagon 1/2" Drive

Silverline 633726 Digital Infrared Thermometer with Laser (-38 to 520°C)

• Plastic pistol-grip with intelligent infrared temperature sensor
• For identifying insulation issues & testing solid surface & liquid temperature
• Measuring range -38 to +520°C (-36.4 to +968°F)
• Clear LCD display with backlight
• Accuracy of ±2°C (±4°F)

RAIL CUTTER, M2AL COBALT, SHORT SERIES, 23MM, GENUINE ROTABROACH

Stihl Chainsaw Chain, 15" 56 LINKS 3621 000 0056 1.6mm

The 20 Litre Red Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
• Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

• Sledge Hammer Head - 10lb / 4.5kg
• Hickory Handle
• Overall Length - Approximately 75cm

RAIL CUTTER, M2AL COBALT, SHORT SERIES, 22MM, GENUINE ROTABROACH

STEL TCT Rail Cutter
TCTR30S - 30mm

SPANNER, FISHPLATE, NUT LOCKING, 30'' LONG 1-11/16" AF (43MM) FOR 1-5/8" SQUARE NUTS STANDARD 0039/058605

Robust Thick 110V 32AMP 14M Yellow Extension Lead Complete with Socket and Plug, Ideal for Construction Sites

PRICE ON APPLICATION

STEL 17mm M42 Rail Cutter Short Series

50 LINK, 1.3MM X 3/8" PITCH

Impact Socket Vossloh 28mm x 21mm x 1/2 Inch Drive

Spare Bolt For Pan Puller

STEL TCT Rail Cutter
TCTR32S - 32mm

INSULATED SLEDGE HAMMER 10LB

35" Overall Length

• Magnetic Retrieving Baton with Release.
• Magnetic Retrieving Batons are innovative and powerful tools to remove ferrous materials in wet or dry environments.
• Non-corrosive, stainless steel.
• Use of safety goggles and gloves is highly recommended when using this item.
• Ideal for removing hardware from storage bins.
• Clean water or degreasing tanks of metal shavings.
• Unique shape allows for easy pick up from walls and corners.
• Constructed with neodymium/rare earth magnets to maximize holding power.
• Pull to release collected material to dispose of.

Designed for use to facilitate the removal of old insulating pads from rail and sleepers.

Robust Thick 110V 16AMP 14M Yellow Extension Lead Complete with Socket and Plug, Ideal for Construction Sites

PRICE ON APPLICATION

Cable Laying Steel Ballast Shovel

PRODUCT HANDLE: 28"/ 711MM ALL STEEL MYD

PRODUCT SIZE: BLADE: 5.1/2" WIDE TAPERING TO 4.1/2" BY 11" LONG

Impact Socket Hexagon 56mm x 1" Drive

Achieve highest quality cuts every time with the CNS 18-30 Battery chainsaw's chain on its 30 cm long bar. Replacement is effortless thanks to the tool-less chain tensioning system.

• Premium Quality Emery Roll Designed for General Maintenance Work, Rust Removal, Sanding and Polishing

STEL TCT Rail Cutter
TCTR28S - 28mm

LAX60 Industrial Multi Purpose Wipes

• Very strong material
• Low-linting, Highly absorbent
• Can be used with solvents and cleaning agents
• Cost-in-use savings over rags
• Portable and pop up box
• Perfect as white cotton rag and mixed replacement
• Construction and manufacturing
• Makes excellent disposable towel for construction site kitchens
• Cleans up oils, lubricants and water spills
• Sheet size - 30cm x 50cm
• Colour - white
• Case - 150 sheets per box
• Reduces rag waste by up to 60%
• 1 Box is equivalant to 2 x 10kg bags of rags

Have sweet-smelling, clean hands whenever you wash them with Original Source Creamy Vanilla Milk & Raspberry Hand Wash. This 300ml bottle has a handy pump dispenser that's packed with 100% natural fragrances.

It's great for the hands and leaves the skin feeling soft and smooth. Add Original Source Hand Wash to your home's handwashing routine for beautifully scented hands with every wash.

• 300ml Original Source Hand Wash X6
• Creamy vanilla & raspberry scent
• 100% natural fragrance
• Vegan-friendly
• Recyclable bottle

• Keying Hammer Head - 7lb / 3.2kg
• Hickory Handle
• Overall Length - Approximately 91.5cm

Designed for use to facilitate the removal of old insulating pads from rail and sleepers.

INSULATED SLEDGE HAMMER 7LB

35" Overall Length

XTRALIFE Alkaline AA batteries

20 Box of 4 Batteries per pack

Robust Thick 110V 16AMP 14M Yellow Extension Lead Complete with Socket and Plug, Ideal for Construction Sites

PRICE ON APPLICATION

STEL TCT Rail Cutter
TCTR23S - 23mm

STEL TCT Rail Cutter
TCTR26S - 26mm

Mop Bucket Green

Blade Length 300MM X 3MM Thick

Mop Bucket Red

The 10 Litre Yellow Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:
● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

This all steel grafting tool has a dished blade and a curved cutting edge which makes it ideal for clay digging and heavy ground breaking work.
It has a forged blade, tubular steel shaft and steel YD grip with wooden cross piece for added comfort.

PRODUCT HANDLE: 28" / 711MM ALL STEEL MYD

PRODUCT SIZE: BLADE: 6" WIDE X 12" LONG

This all steel rabbit shovel has a forged blade, tubular steel shaft and steel YD grip with wooden cross piece for added comfort.

PRODUCT HANDLE: 28" / 711MM ALL STEEL MYD

PRODUCT SIZE: 7" TO 5"X 12"

Length 112cm
Width 15cm
Weight 2.5kg

Mop Bucket Blue

Standard Air Filter for Husqvarna K1270

STEL TCT Rail Cutter
TCTR19S - 19mm

The 10 Litre Black Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

• Premium Quality Emery Roll Designed for General Maintenance Work, Rust Removal, Sanding and Polishing

Sleeper Drill Auger Bits - Bance:
BAN10 - 10mm x 225mm to suit Bance Auger Attachment
BAN16 - 16mm x 225mm to suit Bance Auger Attachment
BAN19 - 19mm x 225mm to suit Bance Auger Attachment

STEL TCT Rail Cutter
TCTR22S - 22mm

ATLAS COPCO COBRA TT AIR FILTER

Compatible With: Atlas Copco Cobra TT-ASL-2007-04-9800 0568 90d

Dimension/Piece:
6.1 in x 1.4 in x 4.3 in
Weight/Piece:
3.7 oz

FORCE Carb & Fuel Injector Cleaner
Quantity: 6
Info: Cleans & de-greases all engine parts
Removes gums, oils & grease
Compatible with catalytic converters
Size: 400 ml Aerosols

Impact Socket Hexagon 44mm x 1" Drive

FORCE Brake & Parts Cleaner
Quantity: 6
Used for cleaning all parts of braking systems
Cleans without dismantling
Dissolves grease & oil
Size: 400ml Aerosols

This all steel Newcastle draining shovel has a forged blade, tubular steel shaft and steel YD grip with wooden cross piece for added comfort.

PRODUCT HANDLE: 28" / 711MM ALL STEEL MYD

PRODUCT SIZE: BLADE : 7" WIDE, TAPERING TO 4" BY 16" LONG

STEL 20mm M42 Rail Cutter Short Series

Trenching All Steel Ballast Shovel

Often known as a '2-way' in some trades.
Used for digging and cleaning out narrow trenches for cable and pipe laying.

PRODUCT HANDLE: 28"/ 711MM ALL STEEL MYD

PRODUCT SIZE: BLADE : 7" WIDE X 11" LONG

• Premium Quality Emery Roll Designed for General Maintenance Work, Rust Removal, Sanding and Polishing