The Karcher Xpert range are robust, reliable Karcher professional pressure washers specially designed for the rigours of trade & construction use.

The Xpert OneTen HD 7125 features tough components throughout, including a brass cylinder head & water inlet, 10m heavy duty wire-braided antikink hose & stainless steel pistoms & spray lance.

Thanks to its 1.4kW motor, the Xpert OneTen provides a max pressure output of 110 bar, enabling you to quickly & easily blast dirt away from the cleaning surface. The detergent intake hose also allows you to apply chemical through the machine, helping to remove any stubborn / ingrained dirt.

The Karcher Xpert range now features the EASY!Force tigger gun, giving you the power to use the high pressure output with ease.

The revolutionary operating concept of the EASY!Force trigger gun uses the recoil force of the high pressure jet & reduces the holding force for the trigger to zero, ensuring more effortless, ergonomic & stress-free use.

In addition the Xpert OneTen also features Karcher’s patented EASY!Lock quick locks, meaning connection is quick and easy, 5 times faster compared with conventional screw connections whilst remaining just as durable & robust. The Xpert OneTen will also feature a stainless steel spray lance, EASY!Force trigger gun & triple nozzle.

The lawn mower blade with a cutting width of 36 cm is suitable for use in the battery-powered LMO 18-36 Battery, thus ensuring excellent cutting results.

Just a few hand movements is all it takes to install the lawn mower blade made from high-grade steel in the LMO 18-33 Battery. With a cutting width of 33 cm it achieves neat cutting results.

For effortless manoeuvring in the garden: the lightweight and extremely manoeuvrable battery lawn mower LMO 18-33 Battery Set including battery and fast charger.

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.

RatGate is a non-return device that allows waste water to flow out of your home but helps preven rats from gaining entry.

• Easy to install - Only basic tools are required to install a RatGate
• Universal Fit - Available in 4" 110mm, 6" 160mm and 9" 225mm versions that it clay, plastic and cast iron drainage pipe
• Tough Construction - Made from high grade laser cut stainless steel
• Maintenance Free - Once the device is installed there is no maintenance required other than a periodic check
• Multi-Directional - Can be fitted in either the up or down stream direction of flow
• Accessible - The RatGate includes a liftable flap mechanism, providing easy access for drain maintenance
• Enviromentally Friendly - The device is humane, poison free and enviromentally friendly

• Magnetic Retrieving Baton with Release.
• Magnetic Retrieving Batons are innovative and powerful tools to remove ferrous materials in wet or dry environments.
• Non-corrosive, stainless steel.
• Use of safety goggles and gloves is highly recommended when using this item.
• Ideal for removing hardware from storage bins.
• Clean water or degreasing tanks of metal shavings.
• Unique shape allows for easy pick up from walls and corners.
• Constructed with neodymium/rare earth magnets to maximize holding power.
• Pull to release collected material to dispose of.

Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.