Rail

Small Plant and Equipment including Rail Movers and Trolleys for use in the Rail Industry available now from Steltools.co.uk

Position
Set Descending Direction

Grid List

10 per page

Items 31 to 40 of 176 total

  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. VORTOK TYPE SPANNER SUITS E & F CLIP STRESSING ROLLERS VORTOK TYPE SPANNER SUITS E & F CLIP STRESSING ROLLERS

    VORTOK TYPE SPANNER SUITS E & F CLIP STRESSING ROLLERS

    £59.55
    Used in conjinction with both the EVSR & FVSR stressing rollers
  2. PANDROL TYPE EXTRACTOR FASTCLIP FE / FC & VIPA-SP, SFC ALL CREAM COLOUR 0039/047851 PANDROL TYPE EXTRACTOR FASTCLIP FE / FC & VIPA-SP, SFC ALL CREAM COLOUR 0039/047851

    PANDROL TYPE EXTRACTOR FASTCLIP FE / FC & VIPA-SP, SFC ALL CREAM COLOUR 0039/047851

    £187.50
    Product Code: 0039/047851 Previously LP18679 Suitable for extracting FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol baseplate types VIPA-SP & SFC baseplate. Instructions for Extractor AE17385 The Extractor tool acts as a lever against the web of the rail and the toe of the clip. To locate the tool hold at angle away from the rail and move forwards to position the tool between the rail and the shoulder, with the rear clip catching frame towards the operators foot. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handles away until the rear of the clip touches the catching frame, to ensure the clip remains in the shoulder, to locate in the ‘Parked’ position. Care should be taken to maintain the operator’s balance during clip extraction as the handle is pushed away. To remove the clip completely from the shoulder, keep pushing the handle so the frame hinges upwards and the clip is removed from the shoulder.
  3. PANDROL TYPE PAN PULLER, E CLIP,TYPE D FOR PR & E CLIPS PANDROL TYPE PAN PULLER, E CLIP,TYPE D FOR PR & E CLIPS

    PANDROL TYPE PAN PULLER, E CLIP,TYPE D FOR PR & E CLIPS

    £136.25
    PANDROL No. LP7632 Especially for e2001 and e2007clips but NOT for 4-shoulder baseplates. NOTE hook positions for max efficiency: Upper pivot: Clip installation Lower pivot: Clip extraction All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use. Installation Instructions ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER
  4. Rotabroach TCT Standard / Short Series Rail Cutter 24mm

    Rotabroach TCT Standard / Short Series Rail Cutter 24mm

    £40.62
    Genuine Rotabroach TCT Short Series Rail Cutter 24mm
  5. Rotabroach TCT Standard / Short Series Rail Cutter 25mm

    Rotabroach TCT Standard / Short Series Rail Cutter 25mm

    £56.79
    Genuine Rotabroach TCT Short Series Rail Cutter 25mm
  6. Rotabroach TCT Standard / Short Series Rail Cutters 21mm SCRWC21 - 21mm  Genuine Rotabroach TCT Short Series Rail Cutter 20mm

    Rotabroach TCT Standard / Short Series Rail Cutters 21mm

    £51.95

    SCRWC21 - 21mm

    Genuine Rotabroach TCT Short Series Rail Cutter 21mm

  7. Rotabroach TCT Standard / Short Series Rail Cutters 32mm

    Rotabroach TCT Standard / Short Series Rail Cutters 32mm

    £51.68
    Genuine Rotabroach TCT Short Series Rail Cutter 32mm
  8. Rotabroach TCT Standard / Short Series Rail Cutters 33mm

    Rotabroach TCT Standard / Short Series Rail Cutters 33mm

    £54.00
    Genuine Rotabroach TCT Short Series Rail Cutter 33mm
  9. RAIL CUTTER, M2AL COBALT, LONG SERIES, 23MM, GENUINE ROTABROACH
  10. RAIL CUTTER, M2AL COBALT, LONG SERIES, 24MM, GENUINE ROTABROACH
Position
Set Descending Direction

Grid List

10 per page

Items 31 to 40 of 176 total

  1. 2
  2. 3
  3. 4
  4. 5
  5. 6