Search results for 'shop our brands'
-
Stephill Generator 3400HM4S 3.4KVA, 2.7KW 110V ONLY
Please Call For Parts List 0114 383 0110 or Email sales@specialisedtools.co.uk
OUTPUT: 3.4kVA / 2.7kW
SOCKETS: 1 x 16a 115v / 1 x 32a 115v / 2 x 16a 230v
ENGINE: Honda GX200
HP/CYLINDERS: 6.5 / 1
START: Recoil
FUEL TANK: 3.1 Litres
RUN TIME: 2.5 Hours
NOISE LEVEL: 71dBA @ 7 metres
DIMENSIONS: L610 x W420 x H415mm
WEIGHT: 36 KG
OPTIONS: Single voltage, LPG conversion, Long run tank (metal), Trolley kit.- Out of stock
- Add to Wishlist
- | Add to Compare
-
PAN PULLER E PLUS, RED END FOR S & C, SUITS EP20127 CLIPS, SLEEPER TYPES F27, EF28, 5EF28 & NEW S&C DESIGNS TO NR56V
£312.94Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180 -
PAN PULLER, STEL, TYPE C FOR PR & E CLIPS & 4 SHOULDER BASEPLATES 0039/042748
£145.60Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary. -
40W RECHARGEABLE CORDLESS LED Work Light - 4000 Lumens
£130.00- Power ; 40W - 4000 Lumens
- Bulb Type ; 16 X 3W Bridgelex LED
- LED Life ; 50000H
- Battery Type ; 7.4V / 13200mAh Rechargeable Li-Ion Battery
- Runtime ; 4 Hours (High Output Mode, 8 Hours Low Output Mode)
- Charging Time ; 4 - 5 Hours
- Input Voltage AC : 100-240V , DC ; 12 - 24V
- Interface ; USB Interface For Charging Devices
- Magnetic ; 4 PCS Strong N40 Magnetic Base
- Dimensions; 160 x 139 x 31MM
- Material ; Aluminium
- 4 Modes ; 100% - 50% - Sos - Flashing
- 4 Power Indicator Lights ;
- All four lights on 100 - 75%
- Red, Yellow And Green Lights On 75 - 50%
- Red And Yellow Lights On 50 - 25%
- Red Light On 25 - 5%
- Red Light Flashing <5%
-
-
SKATE BASKET, STANDARD, NYLON WHEELS C/W 2 X HANDLES
- Minimum Space Required in Vehicle
- Support Arm Works as Stabiliser during Loading and Unloading
- Reduce potential injury and fatigue to operator
- Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
- Safe and efficient method of transporting tools and smaller plant equipment to worksite
- Width - 360mm
- Length - 870mm
- Height - 190mm (without push handles fitted)
- Height - 820mm (with push handles fitted)
- Weight - 13.6kg (without push handles fitted)
- Weight - 17.8kg (with push handles fitted)
- Safe Working Load - (NWR Spec) 250kg
- Safe Working Load - (LU Spec) 75kg
- BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
- RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.
-
PAN PULLER, E PLUS, STEL, ALL CREAM . EPPP 0039/042749
£150.60No. AE17256 formerly No. LP15923
Colour: White
The tool is used with the eP20129 green or eP20130 yellow e-PLUS clips, mostly with RT60 and NR60 S&C layouts.
-
Insulated Heel & Point Crowbar/Digging Bar
£45.65- Insulated Heel & Point Crowbar
- 60" Insulated Solid, Non-Conductive Fibreglass Shaft with Forged Steel Ends
- Conforms to BS8020
- Quote MM0001 when ordering over the phone to receive our special price of £35 (exc vat)
- Tested up to 10000V
- Safe for up to 1000V
- 1.5M
- 6KG