Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool.

• Minimum Space Required in Vehicle
• Support Arm Works as Stabiliser during Loading and Unloading
• Reduce potential injury and fatigue to operator
• Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
• Safe and efficient method of transporting tools and smaller plant equipment to worksite
• Width - 360mm
• Length - 870mm
• Height - 190mm (without push handles fitted)
• Height - 820mm (with push handles fitted)
• Weight - 13.6kg (without push handles fitted)
• Weight - 17.8kg (with push handles fitted) 
• Safe Working Load - (NWR Spec) 250kg
• Safe Working Load - (LU Spec) 75kg
• BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
• RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill

Sleeper Drill Auger Bits - Cembre:
CEM10 - 10mm x 320mm to suit Cembre Sleeper Drill
CEM12 - 12mm x 320mm to suit Cembre Sleeper Drill
CEM13 - 13mm x 320mm to suit Cembre Sleeper Drill
CEM16 - 16mm x 320mm to suit Cembre Sleeper Drill
CEM17 - 17mm x 320mm to suit Cembre Sleeper Drill
CEM18 - 18mm x 320mm to suit Cembre Sleeper Drill
CEM19 - 19mm x 320mm to suit Cembre Sleeper Drill
CEM21 - 21mm x 320mm to suit Cembre Sleeper Drill
CEM22 - 22mm x 320mm to suit Cembre Sleeper Drill