My Cart0

You have no items in your shopping cart.

Steltools.co.uk

Navigation
  • Home /
  • Search results for: 'u69 check rail clamp'

Search results for 'u69 check rail clamp'

Relevance
Set Descending Direction

Grid List

10 per page

Items 21 to 30 of 118 total

  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  1. SPLIT / B TYPE TROLLEY, INSULATED STEL, LUL / TFL SPECIFICATION, COMPLETE WITH BRAKE HANDLE & PUSH BAR, 2 X REDLED Split Trolley LU Specific - B Type

    SPLIT / B TYPE TROLLEY, INSULATED STEL, LUL / TFL SPECIFICATION, COMPLETE WITH BRAKE HANDLE & PUSH BAR, 2 X REDLED

    PLEASE CALL FOR PRICE, AVAILABILITY AND LEAD TIME - 0114 383 0110

    Designed to be used as a manual propelled, stand-alone load-bearing rolling platform for use on the rail track. Each trolley is equipped with a fail safe braking system and is supplied with detachable Brake and Push Handles. The Split Trolley has been designed to be split into two halves to aid with manual handling and transporting to and from site.

  2. SKATE BASKET, STANDARD, NYLON WHEELS C/W 2 X HANDLES SKATE BASKET, STANDARD, NYLON WHEELS C/W 2 X HANDLES

    SKATE BASKET, STANDARD, NYLON WHEELS C/W 2 X HANDLES

    • Minimum Space Required in Vehicle
    • Support Arm Works as Stabiliser during Loading and Unloading
    • Reduce potential injury and fatigue to operator
    • Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
    • Safe and efficient method of transporting tools and smaller plant equipment to worksite
    • Width - 360mm
    • Length - 870mm
    • Height - 190mm (without push handles fitted)
    • Height - 820mm (with push handles fitted)
    • Weight - 13.6kg (without push handles fitted)
    • Weight - 17.8kg (with push handles fitted) 
    • Safe Working Load - (NWR Spec) 250kg
    • Safe Working Load - (LU Spec) 75kg
    • BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
    • RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.
  3. Short pilot pin

    Short Pilot Pin

    £2.95

    Short Pilot Pin

    Used in conjunction with standard length rail cutters for hole centre location and when depressed allows coolant to reach the cutter and aids ejection of the "slug" when drilling is complete

  4. Vortok E-Clip Stressing Roller Vortok E-Clip Stressing Roller

    Vortok E-Clip Stressing Roller

    £144.85
    The VSR is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
    Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
    The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.
  5. Vortok Fastclip Stressing Roller Vortok Fastclip Stressing Roller

    Vortok Fastclip Stressing Roller

    £136.91
    The Vortok Fastclip Stressing Roller is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
    Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
    The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.
  6. Track Magnet

    Track Magnet

    Light Weight "YELLOW" - Standard Strength PADS
    The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
    Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
    As stipulated by Network Rail each unit can be padlocked to deter vandals.

  7. RatGate 4" 110mm RatGate 4" 110mm

    RatGate 4" 110mm

    £93.95

    RatGate is a non-return device that allows waste water to flow out of your home but helps preven rats from gaining entry.

    • Easy to install - Only basic tools are required to install a RatGate
    • Universal Fit - Available in 4" 110mm, 6" 160mm and 9" 225mm versions that it clay, plastic and cast iron drainage pipe
    • Tough Construction - Made from high grade laser cut stainless steel
    • Maintenance Free - Once the device is installed there is no maintenance required other than a periodic check
    • Multi-Directional - Can be fitted in either the up or down stream direction of flow
    • Accessible - The RatGate includes a liftable flap mechanism, providing easy access for drain maintenance
    • Enviromentally Friendly - The device is humane, poison free and enviromentally friendly
  8. Karcher Professional Tree Lopper Battery 18-32

    Karcher Garden Power Tree Lopper Battery 18-32 1.444-020.0

    £217.95

    Cut branches at the push of a button: The battery tree lopper and its high-quality bypass blade cuts branches with a diameter of up to 3 cm effortlessly and without the need for force.

    This product does not include a battery or charger.

  9. SOCKET, IMPACT, BI-SQUARE, 1-1/8" X 1" DRIVE, AS CHAIR SCREW

    Impact Socket Bi-Square 1-1/8" x 1" Drive

    £14.40
    British Rail, Network Rail, Rail

    SOCKET, IMPACT, BI-SQUARE, 1-1/8" X 1" DRIVE, AS CHAIR SCREW

    50mm pin
    500mm ring suits this socket

  10. NEW
    SKATE BASKET, ALUMINIUM TFL SPEC, NYLON WHEELS C/W 2 X HANDLES AND KICK STAND SKATE BASKET, ALUMINIUM TFL SPEC, NYLON WHEELS C/W 2 X HANDLES AND KICK STAND

    SKATE BASKET, ALUMINIUM TFL SPEC, NYLON WHEELS C/W 2 X HANDLES AND KICK STAND

    Minimum Space Required in Vehicle All aluminium body & handles Integrated kick stand Minimum Space Required in Vehicle Support Arm Works as Stabiliser during Loading and Unloading Reduce potential injury and fatigue to operator Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height) Safe and efficient method of transporting tools and smaller plant equipment to worksite Width - 360mm Length - 870mm Height - 190mm (without push handles fitted) Height - 820mm (with push handles fitted) Weight - 7kg (without push handles fitted) Weight - 10kg (with push handles fitted) Safe Working Load - (LU Spec) 75kg BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance. RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.
Relevance
Set Descending Direction

Grid List

10 per page

Items 21 to 30 of 118 total

  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
Category
  1. Abrasives
  2. Sleeper Augers
  3. Electrical
  4. Insulated Tools
  5. Tools
  6. Unilite
  7. Workshop Equipment
  8. Rail
Newsletter
Twitter
  • Error 32: Could not authenticate you.

Company 

Here to Help

Shop With Us

Pay Securely