350 LUMEN SMD LED DUAL POWER HELMET MOUNTABLE HEADLIGHT WITH LI-ION BATTERY PACK, MICRO-USB LEAD, AAA BATTERY CASE, 3M ADHESIVE HELMET MOUNT 

DATA SHEET

200 LUMEN CREE LED HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT AND 2 x 5mm WHITE LEDs - 3 x AAA ENERGIZER (INC)

All-purpose vacuum cleaner built for demanding cleaning applications.

Cartridge filter with float
Large cartridge filter ensures constant high suction power. The float system interrupts the suction flow after reaching the maximum capacity.

Robust bumper
A bumper protects the vacuum as well as walls, machines and other items against damage.

Robust metal latches
The extremely robust metal latches lock more reliably.

LAX60 Industrial Multi Purpose Wipes

• Very strong material
• Low-linting, Highly absorbent
• Can be used with solvents and cleaning agents
• Cost-in-use savings over rags
• Portable and pop up box
• Perfect as white cotton rag and mixed replacement
• Construction and manufacturing
• Makes excellent disposable towel for construction site kitchens
• Cleans up oils, lubricants and water spills
• Sheet size - 30cm x 50cm
• Colour - white
• Case - 150 sheets per box
• Reduces rag waste by up to 60%
• 1 Box is equivalant to 2 x 10kg bags of rags

Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.

The VSR is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

• Fassetta Bolt with Nut & Washer

Jack Handle - Pan Jack, Toe Jack, Zwicky / Kenhi

• Minimum Space Required in Vehicle
• Support Arm Works as Stabiliser during Loading and Unloading
• Reduce potential injury and fatigue to operator
• Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
• Safe and efficient method of transporting tools and smaller plant equipment to worksite
• Width - 360mm
• Length - 870mm
• Height - 190mm (without push handles fitted)
• Height - 820mm (with push handles fitted)
• Weight - 13.6kg (without push handles fitted)
• Weight - 17.8kg (with push handles fitted) 
• Safe Working Load - (NWR Spec) 250kg
• Safe Working Load - (LU Spec) 75kg
• BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
• RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.

Designed to be used as a manual propelled, stand-alone load-bearing rolling platform for use on the rail track. Each trolley is equipped with a fail safe braking system and is supplied with detachable Brake and Push Handles. The Split Trolley has been designed to be split into two halves to aid with manual handling and transporting to and from site.