Insulated Newcastle Treaded Shovel

Tested And Certified To BS8020:2011

Treaded Tested For Live Work 16" Long, 7" Wide Tapering to 4"

Often known as a 'grafter' in some trades.

Designed for digging deep and narrow trenches, channels and post holes.

Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.

Insulated Treaded Round Mouth Shovel Shovel

Treaded

Tested And Certified To BS8020:2011

Handle - 28" / 711mm Blade Size - 10" Wide By 12.1/2" Long

Tested For Live Work

Used for excavating, diggiing and sovelling most aggregates. The pointed blade offers easier penetration in tougher ground.

THINSULATED HAT BEANIE STYLE BLACK HAT

Super class 3-phase cold water pressure washer for continuous operation in tough operating conditions. With built-in high-pressure hose reel.

Proven Kärcher quality
4-pole water-cooled electric motor.
Robust brass cylinder head and ceramic pistons.
Reinforced, unbreakable plastic chassis.

Hose storage
Supported on both sides; for 20 m high-pressure hose.
Hose guide passes under the unit; high stability.
For fast, convenient fitting and removal.

For increased safety
Integrated electronics for unit monitoring.
Automatic switch-off in case of undervoltage or overvoltage.
Switches off in case of leaks or phase failure.

Outstanding mobility
Large rubber tyres for negotiating uneven surfaces, stairs and landings.
Proven sack trolley principle for easy, ergonomic transport.

Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks.
At last – work without getting tired: the EASY!Force high-pressure gun.
EASY!Lock quick-release locks: durable and robust. And five times faster than screws.

All-purpose vacuum cleaner built for demanding cleaning applications.

Cartridge filter with float
Large cartridge filter ensures constant high suction power. The float system interrupts the suction flow after reaching the maximum capacity.

Robust bumper
A bumper protects the vacuum as well as walls, machines and other items against damage.

Robust metal latches
The extremely robust metal latches lock more reliably.

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180

Double Head Tripod For Hexagon Site Lights

Chrome Molybdenum Impact Extension Bar 1" square drive x 10"

Weight - 1.85Kg

250mm x 50mm

Simple to use, versatile and perfect for tree maintenance: the lightweight CNS 18-30 Battery chain saw with tool-less chain tensioning system. 

This product does not include a battery or charger.