The tool is used with the eP20129 green or eP20130 yellow e-PLUS clips, mostly with RT60 and NR60 S&C layouts.
All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use.
Installation Instructions
• Insert center leg of clip into housing.
• Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch.
• Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal.
• The PANPULLER automatically pulls clip to the correct position
When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position.
Extraction Instructions
Reverse the PANPULLER
• Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated).
• Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest.
• If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions.
NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.