Terry Towelling Rags (10kg Bag) Ideal for cleaning and drying out surfaces

• Conforms to BS8020 : 2011
• Keying Hammer Head - 10lb / 4.5kg
• Fiberglass Shaft
• Rubber Grip Handle
• Steel Protective Collar
• Overall Length - Approximately 92.5cm

• Minimum Space Required in Vehicle
• Support Arm Works as Stabiliser during Loading and Unloading
• Reduce potential injury and fatigue to operator
• Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
• Safe and efficient method of transporting tools and smaller plant equipment to worksite
• Width - 360mm
• Length - 870mm
• Height - 190mm (without push handles fitted)
• Height - 820mm (with push handles fitted)
• Weight - 13.6kg (without push handles fitted)
• Weight - 17.8kg (with push handles fitted) 
• Safe Working Load - (NWR Spec) 250kg
• Safe Working Load - (LU Spec) 75kg
• BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
• RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.

Insulated Trenching Shovel Treaded Shovel

Tested And Certified To BS8020:2011

Handle - 28" / 711mm

Blade Size - 7" Wide x 11" Long

Tested For Live Work Often known as a '2-way' in some trades Used for digging and cleaning out narrow trenches for cable and pipe laying

LAX60 Industrial Multi Purpose Wipes

• Very strong material
• Low-linting, Highly absorbent
• Can be used with solvents and cleaning agents
• Cost-in-use savings over rags
• Portable and pop up box
• Perfect as white cotton rag and mixed replacement
• Construction and manufacturing
• Makes excellent disposable towel for construction site kitchens
• Cleans up oils, lubricants and water spills
• Sheet size - 30cm x 50cm
• Colour - white
• Case - 150 sheets per box
• Reduces rag waste by up to 60%
• 1 Box is equivalant to 2 x 10kg bags of rags

Trenching All Steel Ballast Shovel

Often known as a '2-way' in some trades.
Used for digging and cleaning out narrow trenches for cable and pipe laying.

PRODUCT HANDLE: 28"/ 711MM ALL STEEL MYD

PRODUCT SIZE: BLADE : 7" WIDE X 11" LONG

Super class 3-phase cold water pressure washer for continuous operation in tough operating conditions. With built-in high-pressure hose reel.

Proven Kärcher quality
4-pole water-cooled electric motor.
Robust brass cylinder head and ceramic pistons.
Reinforced, unbreakable plastic chassis.

Hose storage
Supported on both sides; for 20 m high-pressure hose.
Hose guide passes under the unit; high stability.
For fast, convenient fitting and removal.

For increased safety
Integrated electronics for unit monitoring.
Automatic switch-off in case of undervoltage or overvoltage.
Switches off in case of leaks or phase failure.

Outstanding mobility
Large rubber tyres for negotiating uneven surfaces, stairs and landings.
Proven sack trolley principle for easy, ergonomic transport.

Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks.
At last – work without getting tired: the EASY!Force high-pressure gun.
EASY!Lock quick-release locks: durable and robust. And five times faster than screws.

All-purpose vacuum cleaner built for demanding cleaning applications.

Cartridge filter with float
Large cartridge filter ensures constant high suction power. The float system interrupts the suction flow after reaching the maximum capacity.

Robust bumper
A bumper protects the vacuum as well as walls, machines and other items against damage.

Robust metal latches
The extremely robust metal latches lock more reliably.

The WVP 10 Adv is a lightweight, handheld, battery operated wet surface cleaner which provides the ideal solution for cleaning all flat surfaces, providing a streak free cleaning solution.

Lightweight, ergonomic and universal
Suitable for all types of smooth surfaces − horizontal, vertical or even overhead.
Comfortable handling and easy to operate.
Safe, easy handling thanks to rubber handle.

Removable, replaceable battery
Allows external battery charging and, in conjunction with a spare battery, uninterrupted working.
Charging state is displayed by 3 LEDs above the ON/OFF switch.

Convenient cleaning of edges
Streak-free cleaning results right up to the edges thanks to the manually adjustable spacer.

Large volume of dirty water tank
Reduces work interruptions thanks to frequent emptying, thus increasing productivity.

WVP 10 Adv version with quick charger
The quick charger and second battery enable almost entirely uninterrupted cleaning.

WVP 10 Adv version with additional narrow suction nozzle
Especially suited to small areas which are not accessible with the standard nozzle.

Powerful lithium-ion battery
Enables work periods of around 30 minutes at a time.

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.