Terry Towelling Rags (10kg Bag) Ideal for cleaning and drying out surfaces

• The Hi-Vis Quick Release Rucksack features fabric and reflective tape that meets the requirements of GO/RT 3279 & EN ISO 20471.
• The innovative quick release anti-entanglement system is designed as a protection device when working in hazardous conditions.
• Features include a secure, weatherproof MP3/CD and mobile phone outlet as well as padded straps and back panel for wearer comfort.
• 100% Polyester 600D Fabric
• 210T PA Coated Fabric
• Orange
• 25 Litre Capacity
• L28cm x W21cm x H43cm

Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool.

It is recommended for safety reasons that contractors should formally check and record the wear of the hooks at intervals of 6 months using the wear gauge.
The gauge is suitable for all types of Panpuller or e-Plus Panpuller.
The wear gauge provides easy Go/No-Go assessment of when to replace the hook.
Work hooks have a tendency to slip off the clips, which can present a significant risk to operators.

Cat No; Reference: 0039/42900 The PANSETTER is suitable for all Network Rail Sleepers fitted with PR, e & e-PLUS. Used for lifting the sleeper to the rail foot. It pushes the rail over, leaving the correct gap between the rail foot and the Pandrol housing, so that the insulator can be easily placed in the correct position. All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use.

Designed to be used singularly or in pairs, for the lifting and transportation of lengths or rail, or parts of points and crossings from one location to another. The Ironman can also be used to transpose rail from one side of the track to the other. Therefore by straddling the running rails, access to the four-foot, six-foot and cess is possible.

Designed to be used singularly or in pairs, for the lifting and transportation of lengths or rail, or parts of points and crossings from one location to another.

The Ironman can also be used to transpose rail from one side of the track to the other. Therefore by straddling the running rails, access to the four-foot, six-foot and cess is possible.

POA

• Minimum Space Required in Vehicle
• Support Arm Works as Stabiliser during Loading and Unloading
• Reduce potential injury and fatigue to operator
• Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
• Safe and efficient method of transporting tools and smaller plant equipment to worksite
• Width - 360mm
• Length - 870mm
• Height - 190mm (without push handles fitted)
• Height - 820mm (with push handles fitted)
• Weight - 13.6kg (without push handles fitted)
• Weight - 17.8kg (with push handles fitted) 
• Safe Working Load - (NWR Spec) 250kg
• Safe Working Load - (LU Spec) 75kg
• BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
• RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.

• Cancelling Indicator Board

The VSR is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

The Vortok Fastclip Stressing Roller is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.

Screen Wash
Quantity: 1
Ready Mixed
Size: 5 Litre Plastican

Safety Data Sheet -

A multi-purpose product which actively displaces water leaving an electrically non-conductive barrier
Penetrates rust and corrosion by capillary action, loosening rusted parts
Protects metal against rust and corrosion
Cleans away grease and grime
Leaves a protective film of lubricant
5 Litre Plastican with Spray Bottle

Safety Data Sheet -

Tygris R220 is a heavy duty, molybdenum disulphide reinforced lubricant which penetrates deeply into drive chains and wire ropes to give long lasting lubrication, preventing corrosion, wear and chain elongation. It gives outstanding performance under extreme load and is resistant to fling off

3-IN-ONE’s original drip oil lubricates, cleans and prevents rust. Its precise, easy-to-use drip spout enables precise lubrication, with no overspray or splatter. It can be used on in-line skates, tools, bicycles, wheels, fans and moving parts

3-IN-ONE with added PTFE is an aerosol lubricant specifically formulated to deliver outstanding lubrication and longer lasting protection through its low friction characteristics. PTFE stands for polytetrafluoroethylene, sometimes known as Teflon. This fantastic new formula is ideal for chains, cables and gear mechanisms and is an essential tool to keep your bike and workplace running smoothly

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.

WS3-10 Pacific Watersafe Cut Level 5 Glove

• Size 10
• Extra Large
• 13 gauge, green, Azura and polyester liner
• Dual latex coating
• Waterproof to the wrist
• Superb wet or dry suction grip
• Knit wrist

LAX60 Industrial Multi Purpose Wipes

• Very strong material
• Low-linting, Highly absorbent
• Can be used with solvents and cleaning agents
• Cost-in-use savings over rags
• Portable and pop up box
• Perfect as white cotton rag and mixed replacement
• Construction and manufacturing
• Makes excellent disposable towel for construction site kitchens
• Cleans up oils, lubricants and water spills
• Sheet size - 30cm x 50cm
• Colour - white
• Case - 150 sheets per box
• Reduces rag waste by up to 60%
• 1 Box is equivalant to 2 x 10kg bags of rags

RatGate is a non-return device that allows waste water to flow out of your home but helps preven rats from gaining entry.

• Easy to install - Only basic tools are required to install a RatGate
• Universal Fit - Available in 4" 110mm, 6" 160mm and 9" 225mm versions that it clay, plastic and cast iron drainage pipe
• Tough Construction - Made from high grade laser cut stainless steel
• Maintenance Free - Once the device is installed there is no maintenance required other than a periodic check
• Multi-Directional - Can be fitted in either the up or down stream direction of flow
• Accessible - The RatGate includes a liftable flap mechanism, providing easy access for drain maintenance
• Enviromentally Friendly - The device is humane, poison free and enviromentally friendly

All-purpose vacuum cleaner built for demanding cleaning applications.

Cartridge filter with float
Large cartridge filter ensures constant high suction power. The float system interrupts the suction flow after reaching the maximum capacity.

Robust bumper
A bumper protects the vacuum as well as walls, machines and other items against damage.

Robust metal latches
The extremely robust metal latches lock more reliably.

The WVP 10 Adv is a lightweight, handheld, battery operated wet surface cleaner which provides the ideal solution for cleaning all flat surfaces, providing a streak free cleaning solution.

Lightweight, ergonomic and universal
Suitable for all types of smooth surfaces − horizontal, vertical or even overhead.
Comfortable handling and easy to operate.
Safe, easy handling thanks to rubber handle.

Removable, replaceable battery
Allows external battery charging and, in conjunction with a spare battery, uninterrupted working.
Charging state is displayed by 3 LEDs above the ON/OFF switch.

Convenient cleaning of edges
Streak-free cleaning results right up to the edges thanks to the manually adjustable spacer.

Large volume of dirty water tank
Reduces work interruptions thanks to frequent emptying, thus increasing productivity.

WVP 10 Adv version with quick charger
The quick charger and second battery enable almost entirely uninterrupted cleaning.

WVP 10 Adv version with additional narrow suction nozzle
Especially suited to small areas which are not accessible with the standard nozzle.

Powerful lithium-ion battery
Enables work periods of around 30 minutes at a time.

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180

200 LUMEN CREE LED HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT AND 2 x 5mm WHITE LEDs - 3 x AAA ENERGIZER (INC)

275 LUMEN CREE LED USB RECHARGABLE HELMET MOUNTABLE HEADLIGHT WITH 2 x 5mm RED LEDs - 3.7v 1800mAh LI-POLYMER INTEGRAL BATTERY C/W DRAWSTRING STORAGE POUCH

325 LUMEN COB LED INDUSTRIAL IK07 SENSOR HEADLIGHT - 3.7v 1500mAh LI-PO INTEGRAL BATTERY - MICRO-USB CABLE (INC)

350 LUMEN SMD LED DUAL POWER HELMET MOUNTABLE HEADLIGHT WITH LI-ION BATTERY PACK, MICRO-USB LEAD, AAA BATTERY CASE, 3M ADHESIVE HELMET MOUNT 

DATA SHEET

450 LUMEN CREE LED HEADLIGHT WITH SPOT & FLOOD LEDs - HYBRID BATTERY PACK - 1 x 2600mAh 18650 LI-ION(INC) AND TAKES 2 x AA BATTERIES (NOT INC) C/W ZIPPED WET SUIT MATERIAL STORAGE POUCH

475 LUMEN SENSOR HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT - 3.7v 1800mAh LI-PO INTEGRAL BATTERY (INC) C/W DRAWSTRING STORAGE POUCH 

750 LUMEN CREE LED USB RECHARGEABLE HEADLIGHT WITH LI-ION BATTERY PACK WITH RED LIGHT, MICRO-USB CABLE - 2x 3.7v 2000mAh LI-ION BATTERIES (INC) - COMES IN ZIPPED BLACK STORAGE CASE 

275 LUMEN SMD LED USB RECHARGABLE INSPECTION LIGHT WITH 250 LUMEN CREE TORCH IN TOP AND ROTATING MAGNETIC STAND - 3.7v 1600 mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

500 LUMEN COMPACT WORK LIGHT WITH 300 LM TOP TORCH AND FOLDING MAGNETIC HANDLE/STAND/HOOK - 3.7v 2000mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

1000 LUMEN COMPACT WORK LIGHT WITH 300 LM TOP TORCH AND FOLDING MAGNETIC HANDLE/STACK/HOOK - 3.7v 5200mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

Single Head Tripod For Hexagon Site Lights

Double Head Tripod For Hexagon Site Lights

1250 LUMEN CRI "COLOUR-RENDER-INDEX"  INDUSTRIAL INSPECTION LIGHT WITH 3 LIGHT COLOURS PLUS UV FLOOD LIGHT AND WHITE LED TOP TORCH - RECHARGEABLE WITH CHARGING DOCK AND TYPE-C USB CABLE 

200 LUMEN CRI "COLOUR-RENDER-INDEX" COB LED INDUSTRIAL IK07 SENSOR HEADLIGHT LIGHT WITH 3 COLOURS - 3.7v 1500mAh LI-PO INTEGRAL BATTERY - MICRO-USB CABLE (INC)

27 LUMEN CREE LED ALUMINIUM INDUSTRIAL PENLIGHT - 2 x AAA DURACELL BATTERIES (INC)

450 LUMEN CREE LED USB RECHARGEABLE ALUMINIUM FLASHLIGHT WITH BELT POUCH AND WRIST STRAP - REMOVABLE 3.7v 800mAh 14500 LI-ION BATTERY

DATA SHEET

1100 LUMEN CREE LED USB RECHARGEABLE ALUMINIUM FLASHLIGHT WITH BELT POUCH AND WRIST STRAP - REMOVABLE 3.7v 2600mAh 18650 LI-ION BATTERY

DATA SHEET

500 LUMEN CREE LED POLMER & ALUMINIUM INDUSTRIAL FLASHLIGHT IP68 - 2M SUBMERSIBLE & 2M DROP PROOF - 2 x AA DURACELL BATTERIES (INC)

DATA SHEET

ATEX - 150 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 3M SUB. FLASHLIGHT 4 x AA (NOT INC)

DATA SHEET

ATEX - 225 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 1m SUB. HEADLIGHT 3 x AAA (NOT INC)

DATA SHEET

DC-USB CHARGING KIT FOR PS-RB2LION, PS-IL6R, IL-SIG1, PS-IL5R, PS-IL3R (WITH MULTI-COUNTRY PLUGS {UK, AUS &EU})

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.

IperCleaner - Hand Sanitiser Anti Bacterial Gel 200ml - 70% Alcohol IPERCLEANER is an antibacterial disinfectant gel, specially made to easily sanitize the hands without the need for rinsing. By acting in seconds, it removes 99% of viruses, bacteria and fungi. Its formula, suitable for daily use, allows you to disinfect your hands effectively, quickly and safely, in any situation and condition. IperCleaner is the best solution for guaranteed hygiene whenever there is no possibility to wash your hands. IPERCLEANER GEL Hand Sanitizer is practical in any situation where you need to disinfect your hands: away from home, when you cannot wash your hands (for example: on the road, on public transport, after touching money, etc.), in the hospital sector and professional, at home (in taking care of the patient). Pour on the palm of the hand a sufficient amount of product to cover the entire surface of the hands and rub for 30 seconds. Repeat the operation. The product is used without water. This item contains - Alcohol Denat., Aqua, Glycerin, Carbomer, Parfum, Aminomethyl Propanol, Propylene Glycol.

For effortless manoeuvring in the garden: the lightweight and extremely manoeuvrable battery lawn mower LMO 18-33 Battery Set including battery and fast charger.

Battery and fast charger included: the battery-powered hedge trimmer HGE 18-50 Battery Set. Its 180° rotating handle and the cuttings sweeper ensure convenient hedge cutting.

All lined up: The battery-powered GSH 18-20 Battery 2-in-1 grass & shrub shears cut lawn edges with precision and trim shrubs into elegant shapes. For precision cutting results.
This product does not include a battery or charger.

Just a few hand movements is all it takes to install the lawn mower blade made from high-grade steel in the LMO 18-33 Battery. With a cutting width of 33 cm it achieves neat cutting results.

The lawn mower blade with a cutting width of 36 cm is suitable for use in the battery-powered LMO 18-36 Battery, thus ensuring excellent cutting results.

The coil with practical cap and twisted trimmer cord ensures good results in places that are difficult to access. It is suitable for all 18 V Kärcher Battery Power lawn trimmers.

Is uncontrolled growth rampant in your garden in places that are difficult to access? Not after using the trimmer with double blade, compatible with all 18 V and 36 V Kärcher battery lawn trimmers.

HAND HELD INFRARED THERMOMETER IR-801

Easy-to-use infrared thermometer with Class II laser sighting, ideal for non-contact measurement of surface temperatures. Suitable for food preparation, plant & general maintenance, HVAC, transport & automotive, asphalt, health & safety, diesel and eet maintenance.

Features:

• -50° to 350°C x 0.1°
• Measures °C or °F
• Point, pull the trigger and read the display
• Class II laser to identify the centre point of the area being measured
• Distance to spot size ratio is 13 to 1 at the focal point
• Fixed emissivity at 0.95
• Response time less than 500 milliseconds
• 25mm LCD display with backlight
• Automatic data hold when trigger released
• Min/max memory
• Auto power-off after 20 seconds of no activity
• Low battery indication
• Backlight and laser can be user disabled
• Impact-resistant ABS case 
• Supplied with battery: LR-61

Hand-tools for PANLOCK and Elastic Spikes.

Hammers should NEVER be used for either insertion or extraction of PANLOCK.

Hammers may be used for the loosening of rusty PANLOCK, but NOT to fully extract.

Hammers can be used for the insertion of elastic spikes.

Available from Tool and Steel.

This tool is supplied with separate and detailed operating instructions.

DATA SHEET

https://unilite.co.uk/wp-content/uploads/2021/07/HL-8R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/HL-11R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/IL-175R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/IL-375R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/IL-SIG1-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/09/IL-925R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/SLR-1750-Data-Sheet.pdf

3500 LUMEN RECHARGEABLE SMD SITE LIGHT WITH REMOVEABLE BATTERY
USB POWER BANK FACILITY
BATTERY LEVEL INDICATOR
STRONG MAGNETIC FEET 

240v UK MAINS CHARGER (INC) 

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

6000 Lumens li 6000 Lumens light output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available) ght output •60m beam •4 light levels •Hybrid design - powered by internal battery or AC charger •Robust housing made from the toughest composite materials •Drop tested from 2.5m •Lightweight only 1.5kg •IP54 Waterproof •Li-ion battery (97.68Wh) •Battery status indication •Supplied with AC Mains Charger (Optional Vehicle Charger available)

550 lumen white Nichia LED, 6500k ƒ Hard anodized die cast matte aluminium body ƒ Tactical rubberised micro switch operation ƒ 3 light mode settings and 8Hz defence strobe ƒ Flawless smooth reflector for long distance beam ƒ IP67 dust and waterproof - 1m submersible ƒ Impact resistant to 1m ƒ Built-in USB rubberised charging port cover ƒ Battery level and charging indicator LED ƒ 1A USB-C charging - fast 2 hours charge time ƒ High quality USB-C charging cable included ƒ Nylon velcro holster & safety nylon wrist strap

A durable, insulated wheelbarrow fabricated from a rugged single mould polyethylene material ideal for use on rail possessions and also utilities. 

• The STEL Insulated Wheelbarrow has a puncture proof tyre, also a double skin with 6mm walls made of Polyethylene to ensure maximum durability.
• No metal core parts are used resulting in the insulated wheelbarrow being a safer option for use in areas where conductivity may be an issue.
• The STEL insulated wheelbarrow is commonly used on or around 3rd rail / conductor rail working environments for safer working within possession zones.
• The STEL insulated wheelbarrow is also used for the application of cable laying.
• Our insulated wheelbarrow is robust with re-enforced handles and an extra strong tipping bar located in front of the wheel.
• Designed for the outside, the insulated wheelbarrow is rust free with a one piece mould construction resulting in fewer stress points.

• Capacity:      90L / 20 Gallon (Approx)
• Weight:        12kg (Empty)
• Dimensions: Length: 1540 x Width: 615 x Height: 620mm

Require more than one unit? Please call or email our sales office to request a quotation with respect to a multiple purchase discount.

Enquire today - Tel: 0114 383 0110 or email: sales@specialisedtools.co.uk

• 110V 16Amp Plug

PRICE ON APPLICATION

Strong, Flexible Aluminium Foil Tape (50mm x 45m) on Silicon Paper Liner for use on Most Surfaces. Flame Retardant and Excellent Temperature Performance. UV-Resistant and Waterproof

450 LUMEN CREE LED FOCUS ALUMINIUM FLASHLIGHT C/W WRIST STRAP AND IN A CLEAR HARDCASE DISPLAY BX - 4 x AAA DURACELL BATTERIES (INC)

DATA SHEET

DATA SHEET

Data Sheet

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

• Jerry Can Flexible Pouring Spout (Black)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

• Jerry Can Flexible Pouring Spout (Green)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

Jerry Can Flexible Pouring Spout (Red)
Optimum flow is assured when using our spouts with our cans
Special breathing channel provide steady, glug-free pouring
Each spout has an internal filter to protect charging tank from dirt and foreign bodies
Suitable for 5L, 10L and 20L Jerry Cans
Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

• Jerry Can Flexible Pouring Spout (Yellow)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

Jerry Can Rigid Pouring Spout Black

SPARE SCREW TOP AND SEAL FOR JERRY CANS

The 20 Litre Black Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
•  Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

The 20 Litre Red Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
• Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

The 10 Litre Green Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:
● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

The 10 Litre Black Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

The 10 Litre Red Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:
● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Single Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

The 10 Litre Yellow Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:
● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

The 20 Litre Green Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
•  Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS