Terry Towelling Rags (10kg Bag) Ideal for cleaning and drying out surfaces

• 110V 16Amp Plug

PRICE ON APPLICATION

Perfect for intricate tasks where dexterity and breath-ability are essential.
Fabric: Nylon, PU
Colour: Black
SIZE 11 XXL

Cat No Reference: 0039/47852 Suitable for use on FASTCLIP FC and FASTCLIP FE The original version of the sleeper lifter can still be used in conjunction the new installer where sleepers need to be lifted more than 20mm. Instructions for Sleeper Lifter LP12608 The scissor action of the frame opens in order to locate the pincers of the tool into the sides of the shoulder with the clip in the ‘Parked’ position. Place the hook of the tool over the head of the rail, and as the body of the tool rises the scissor action closes the pincers and lock into the shoulder. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during sleeper lifting. Push the handle away to lift any ‘dropped’ sleeper if ballast conditions do not support the sleepers engaging with the foot of the rail. These tools should be used in pairs to lift the sleeper to locate both rails simultaneously with the rail seats of the sleeper. The sleeper lifter can used on the same rail seat as the FASTCLIP installer, by locating between the hooks of the installation tool.

It is recommended for safety reasons that contractors should formally check and record the wear of the hooks at intervals of 6 months using the wear gauge.
The gauge is suitable for all types of Panpuller or e-Plus Panpuller.
The wear gauge provides easy Go/No-Go assessment of when to replace the hook.
Work hooks have a tendency to slip off the clips, which can present a significant risk to operators.

Cat No; Reference: 0039/42900 The PANSETTER is suitable for all Network Rail Sleepers fitted with PR, e & e-PLUS. Used for lifting the sleeper to the rail foot. It pushes the rail over, leaving the correct gap between the rail foot and the Pandrol housing, so that the insulator can be easily placed in the correct position. All Pandrol hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars for improved ergonomic and safer use.

Designed to be used singularly or in pairs, for the lifting and transportation of lengths or rail, or parts of points and crossings from one location to another. The Ironman can also be used to transpose rail from one side of the track to the other. Therefore by straddling the running rails, access to the four-foot, six-foot and cess is possible.

Designed to be used singularly or in pairs, for the lifting and transportation of lengths or rail, or parts of points and crossings from one location to another.

The Ironman can also be used to transpose rail from one side of the track to the other. Therefore by straddling the running rails, access to the four-foot, six-foot and cess is possible.

POA

• Minimum Space Required in Vehicle
• Support Arm Works as Stabiliser during Loading and Unloading
• Reduce potential injury and fatigue to operator
• Doesn't have any influence on axel counters, even when they are not correctly adjusted (set over height)
• Safe and efficient method of transporting tools and smaller plant equipment to worksite
• Width - 360mm
• Length - 870mm
• Height - 190mm (without push handles fitted)
• Height - 820mm (with push handles fitted)
• Weight - 13.6kg (without push handles fitted)
• Weight - 17.8kg (with push handles fitted) 
• Safe Working Load - (NWR Spec) 250kg
• Safe Working Load - (LU Spec) 75kg
• BS EN 13977:2011 - Railway application - Track - Safety requirements for portable machines and Skate Baskets for construction and maintenance.
• RIS 1701 PLT - Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work.

• A Network Rail approved compact and lightweight Possession Limit Board with integral rail top clamp.
• Tilt Switch Operation - No keys to use or lose
• LED Light - Flashing Day and Night
• Powered by 2 No "C" cell batteries
• Weight - 2kg

• Cancelling Indicator Board

The VSR is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

The Vortok Fastclip Stressing Roller is designed to attach to the rail fastening, and by means of a rotating lift arm and bearing, contact the underside of the rail head and lift the rail from the sleeper (tie).
Once lifted, the rail can be moved with very low friction for the purposes of rail stressing, the resultant excellent stress distribution is therefore optimised.
The VSR can also be used for changing rail pads and the e-clip product has been designed with extra lift for that specific purpose.

Light Weight "YELLOW" - Standard Strength PADS
The utilisation of new magnet material technology has enabled the dramatic reduction to the overall weight of the actual magnet unit, therefore developing a much more simplified track fixing procedure.
Single line attachment has been the key to significantly reducing the installation time, now approximately 30 seconds from stepping into the 4ft.
As stipulated by Network Rail each unit can be padlocked to deter vandals.

Screen Wash
Quantity: 1
Ready Mixed
Size: 5 Litre Plastican

Safety Data Sheet -

A multi-purpose product which actively displaces water leaving an electrically non-conductive barrier
Penetrates rust and corrosion by capillary action, loosening rusted parts
Protects metal against rust and corrosion
Cleans away grease and grime
Leaves a protective film of lubricant
5 Litre Plastican with Spray Bottle

Safety Data Sheet -

Tygris R220 is a heavy duty, molybdenum disulphide reinforced lubricant which penetrates deeply into drive chains and wire ropes to give long lasting lubrication, preventing corrosion, wear and chain elongation. It gives outstanding performance under extreme load and is resistant to fling off

3-IN-ONE’s original drip oil lubricates, cleans and prevents rust. Its precise, easy-to-use drip spout enables precise lubrication, with no overspray or splatter. It can be used on in-line skates, tools, bicycles, wheels, fans and moving parts

3-IN-ONE with added PTFE is an aerosol lubricant specifically formulated to deliver outstanding lubrication and longer lasting protection through its low friction characteristics. PTFE stands for polytetrafluoroethylene, sometimes known as Teflon. This fantastic new formula is ideal for chains, cables and gear mechanisms and is an essential tool to keep your bike and workplace running smoothly

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Tygris Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.

Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.

LAX60 Industrial Multi Purpose Wipes

• Very strong material
• Low-linting, Highly absorbent
• Can be used with solvents and cleaning agents
• Cost-in-use savings over rags
• Portable and pop up box
• Perfect as white cotton rag and mixed replacement
• Construction and manufacturing
• Makes excellent disposable towel for construction site kitchens
• Cleans up oils, lubricants and water spills
• Sheet size - 30cm x 50cm
• Colour - white
• Case - 150 sheets per box
• Reduces rag waste by up to 60%
• 1 Box is equivalant to 2 x 10kg bags of rags

RatGate is a non-return device that allows waste water to flow out of your home but helps preven rats from gaining entry.

• Easy to install - Only basic tools are required to install a RatGate
• Universal Fit - Available in 4" 110mm, 6" 160mm and 9" 225mm versions that it clay, plastic and cast iron drainage pipe
• Tough Construction - Made from high grade laser cut stainless steel
• Maintenance Free - Once the device is installed there is no maintenance required other than a periodic check
• Multi-Directional - Can be fitted in either the up or down stream direction of flow
• Accessible - The RatGate includes a liftable flap mechanism, providing easy access for drain maintenance
• Enviromentally Friendly - The device is humane, poison free and enviromentally friendly

Super class 3-phase cold water pressure washer for continuous operation in tough operating conditions. With built-in high-pressure hose reel.

Proven Kärcher quality
4-pole water-cooled electric motor.
Robust brass cylinder head and ceramic pistons.
Reinforced, unbreakable plastic chassis.

Hose storage
Supported on both sides; for 20 m high-pressure hose.
Hose guide passes under the unit; high stability.
For fast, convenient fitting and removal.

For increased safety
Integrated electronics for unit monitoring.
Automatic switch-off in case of undervoltage or overvoltage.
Switches off in case of leaks or phase failure.

Outstanding mobility
Large rubber tyres for negotiating uneven surfaces, stairs and landings.
Proven sack trolley principle for easy, ergonomic transport.

Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks.
At last – work without getting tired: the EASY!Force high-pressure gun.
EASY!Lock quick-release locks: durable and robust. And five times faster than screws.

All-purpose vacuum cleaner built for demanding cleaning applications.

Cartridge filter with float
Large cartridge filter ensures constant high suction power. The float system interrupts the suction flow after reaching the maximum capacity.

Robust bumper
A bumper protects the vacuum as well as walls, machines and other items against damage.

Robust metal latches
The extremely robust metal latches lock more reliably.

The WVP 10 Adv is a lightweight, handheld, battery operated wet surface cleaner which provides the ideal solution for cleaning all flat surfaces, providing a streak free cleaning solution.

Lightweight, ergonomic and universal
Suitable for all types of smooth surfaces − horizontal, vertical or even overhead.
Comfortable handling and easy to operate.
Safe, easy handling thanks to rubber handle.

Removable, replaceable battery
Allows external battery charging and, in conjunction with a spare battery, uninterrupted working.
Charging state is displayed by 3 LEDs above the ON/OFF switch.

Convenient cleaning of edges
Streak-free cleaning results right up to the edges thanks to the manually adjustable spacer.

Large volume of dirty water tank
Reduces work interruptions thanks to frequent emptying, thus increasing productivity.

WVP 10 Adv version with quick charger
The quick charger and second battery enable almost entirely uninterrupted cleaning.

WVP 10 Adv version with additional narrow suction nozzle
Especially suited to small areas which are not accessible with the standard nozzle.

Powerful lithium-ion battery
Enables work periods of around 30 minutes at a time.

Colour: Red working head (matches the appropriate e-PLUS clip type), and yellow handle. For use with eP20127 clips for retrofitting to sleeper types: F27, EF28, 5EF28, and for the new S&C designs to NR56V. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32mm diameter cylindrical straight handles Installation Instructions • Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position When correctly installed the centre leg of ALL types of e-PLUS clips, protrude beyond the shoulder to hold the side-insulator in the correct position. This tool is 'handed' to hold the insulator in position during clip insertion. This means that the tool cannot be used for extraction of the clip. To extract this e-Plus clip use a standard PANPULLER Type LP1180

200 LUMEN CREE LED HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT AND 2 x 5mm WHITE LEDs - 3 x AAA ENERGIZER (INC)

275 LUMEN CREE LED USB RECHARGABLE HELMET MOUNTABLE HEADLIGHT WITH 2 x 5mm RED LEDs - 3.7v 1800mAh LI-POLYMER INTEGRAL BATTERY C/W DRAWSTRING STORAGE POUCH

325 LUMEN COB LED INDUSTRIAL IK07 SENSOR HEADLIGHT - 3.7v 1500mAh LI-PO INTEGRAL BATTERY - MICRO-USB CABLE (INC)

450 LUMEN CREE LED HEADLIGHT WITH SPOT & FLOOD LEDs - HYBRID BATTERY PACK - 1 x 2600mAh 18650 LI-ION(INC) AND TAKES 2 x AA BATTERIES (NOT INC) C/W ZIPPED WET SUIT MATERIAL STORAGE POUCH

475 LUMEN SENSOR HEADLIGHT WITH 3M VHB ADHESIVE HELMET MOUNT - 3.7v 1800mAh LI-PO INTEGRAL BATTERY (INC) C/W DRAWSTRING STORAGE POUCH 

750 LUMEN CREE LED USB RECHARGEABLE HEADLIGHT WITH LI-ION BATTERY PACK WITH RED LIGHT, MICRO-USB CABLE - 2x 3.7v 2000mAh LI-ION BATTERIES (INC) - COMES IN ZIPPED BLACK STORAGE CASE 

275 LUMEN SMD LED USB RECHARGABLE INSPECTION LIGHT WITH 250 LUMEN CREE TORCH IN TOP AND ROTATING MAGNETIC STAND - 3.7v 1600 mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

625 LUMEN COB LED USB RECHARGEABLE INSPECTION LIGHT WITH TOP TORCH AND MAGNETIC BACK

500 LUMEN COMPACT WORK LIGHT WITH 300 LM TOP TORCH AND FOLDING MAGNETIC HANDLE/STAND/HOOK - 3.7v 2000mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

1000 LUMEN COMPACT WORK LIGHT WITH 300 LM TOP TORCH AND FOLDING MAGNETIC HANDLE/STACK/HOOK - 3.7v 5200mAh LI-ION INTEGRAL BATTERY - MICRO-USB CABLE (INC)

1250 LUMEN CRI "COLOUR-RENDER-INDEX"  INDUSTRIAL INSPECTION LIGHT WITH 3 LIGHT COLOURS PLUS UV FLOOD LIGHT AND WHITE LED TOP TORCH - RECHARGEABLE WITH CHARGING DOCK AND TYPE-C USB CABLE 

200 LUMEN CRI "COLOUR-RENDER-INDEX" COB LED INDUSTRIAL IK07 SENSOR HEADLIGHT LIGHT WITH 3 COLOURS - 3.7v 1500mAh LI-PO INTEGRAL BATTERY - MICRO-USB CABLE (INC)

450 LUMEN CREE LED USB RECHARGEABLE ALUMINIUM FLASHLIGHT WITH BELT POUCH AND WRIST STRAP - REMOVABLE 3.7v 800mAh 14500 LI-ION BATTERY

DATA SHEET

1100 LUMEN CREE LED USB RECHARGEABLE ALUMINIUM FLASHLIGHT WITH BELT POUCH AND WRIST STRAP - REMOVABLE 3.7v 2600mAh 18650 LI-ION BATTERY

DATA SHEET

500 LUMEN CREE LED POLMER & ALUMINIUM INDUSTRIAL FLASHLIGHT IP68 - 2M SUBMERSIBLE & 2M DROP PROOF - 2 x AA DURACELL BATTERIES (INC)

DATA SHEET

ATEX - 150 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 3M SUB. FLASHLIGHT 4 x AA (NOT INC)

DATA SHEET

ATEX - 225 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 1m SUB. HEADLIGHT 3 x AAA (NOT INC)

DATA SHEET

DC-USB CHARGING KIT FOR PS-RB2LION, PS-IL6R, IL-SIG1, PS-IL5R, PS-IL3R (WITH MULTI-COUNTRY PLUGS {UK, AUS &EU})

Suitable for use on FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol VIPA-SP & SFC baseplates. Finally, because the reaction point for the installation tool has been moved to the head of the rail, the installer is able to lift sleepers (about 20mm) as part of the normal action of the tool, lifting from the rear arches of the clip before driving the clip into the installed position. NOTE: This tool has options avaialble under separate reference numbers; for variants with either insulated handles and / or cranked heads for confined spaces. The standard tool is always supplied with a straight head and steel handle. Optional variant of this tool using cranked head for confined spaces and insulated handle To insert the clips from the ‘Parked’ position of the shoulder as delivered from the sleeper factory, follow these instructions. The paddle should be in the normal front pivot hole and the side cheeks in the down position. (Different from the photograph) for ALL rail sizes. Locate the hooks on the side arms over the head of the rail. To insert the clips, grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip driving. Pull on the handle until refusal. The fully driven position for FASTCLIP ‘FC’ is achieved when the outer legs of the clip touch the rear of the side insulator in the shoulder, or with up to 3 mm of clearance. The FASTCLIP ‘FE’ installed position does NOT touch the shoulder or insulator. Once located the tool can be slid along the rail between sleepers for the next clip insertion. If the clip needs to be re-inserted from fully extracted, move the cheeks to the up position, to extend the reach of the tool. If more reach is required, the paddle can be moved to the rear pivot hole. Follow the instructions above.

IperCleaner - Hand Sanitiser Anti Bacterial Gel 200ml - 70% Alcohol IPERCLEANER is an antibacterial disinfectant gel, specially made to easily sanitize the hands without the need for rinsing. By acting in seconds, it removes 99% of viruses, bacteria and fungi. Its formula, suitable for daily use, allows you to disinfect your hands effectively, quickly and safely, in any situation and condition. IperCleaner is the best solution for guaranteed hygiene whenever there is no possibility to wash your hands. IPERCLEANER GEL Hand Sanitizer is practical in any situation where you need to disinfect your hands: away from home, when you cannot wash your hands (for example: on the road, on public transport, after touching money, etc.), in the hospital sector and professional, at home (in taking care of the patient). Pour on the palm of the hand a sufficient amount of product to cover the entire surface of the hands and rub for 30 seconds. Repeat the operation. The product is used without water. This item contains - Alcohol Denat., Aqua, Glycerin, Carbomer, Parfum, Aminomethyl Propanol, Propylene Glycol.

For effortless manoeuvring in the garden: the lightweight and extremely manoeuvrable battery lawn mower LMO 18-33 Battery Set including battery and fast charger.

Battery and fast charger included: the battery-powered hedge trimmer HGE 18-50 Battery Set. Its 180° rotating handle and the cuttings sweeper ensure convenient hedge cutting.

The coil with practical cap and twisted trimmer cord ensures good results in places that are difficult to access. It is suitable for all 18 V Kärcher Battery Power lawn trimmers.

Is uncontrolled growth rampant in your garden in places that are difficult to access? Not after using the trimmer with double blade, compatible with all 18 V and 36 V Kärcher battery lawn trimmers.

HAND HELD INFRARED THERMOMETER IR-801

Easy-to-use infrared thermometer with Class II laser sighting, ideal for non-contact measurement of surface temperatures. Suitable for food preparation, plant & general maintenance, HVAC, transport & automotive, asphalt, health & safety, diesel and eet maintenance.

Features:

• -50° to 350°C x 0.1°
• Measures °C or °F
• Point, pull the trigger and read the display
• Class II laser to identify the centre point of the area being measured
• Distance to spot size ratio is 13 to 1 at the focal point
• Fixed emissivity at 0.95
• Response time less than 500 milliseconds
• 25mm LCD display with backlight
• Automatic data hold when trigger released
• Min/max memory
• Auto power-off after 20 seconds of no activity
• Low battery indication
• Backlight and laser can be user disabled
• Impact-resistant ABS case 
• Supplied with battery: LR-61

Hand-tools for PANLOCK and Elastic Spikes.

Hammers should NEVER be used for either insertion or extraction of PANLOCK.

Hammers may be used for the loosening of rusty PANLOCK, but NOT to fully extract.

Hammers can be used for the insertion of elastic spikes.

Available from Tool and Steel.

This tool is supplied with separate and detailed operating instructions.

DATA SHEET

DATA SHEET

https://unilite.co.uk/wp-content/uploads/2021/07/HL-11R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/IL-175R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/IL-375R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/IL-SIG1-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/09/IL-925R-Data-Sheet.pdf

https://unilite.co.uk/wp-content/uploads/2021/07/SLR-1750-Data-Sheet.pdf

3500 LUMEN RECHARGEABLE SMD SITE LIGHT WITH REMOVEABLE BATTERY
USB POWER BANK FACILITY
BATTERY LEVEL INDICATOR
STRONG MAGNETIC FEET 

240v UK MAINS CHARGER (INC) 

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

DATA SHEET

• Thermal grip glove - conforms to EN388
• Seamless 10 gauge premium quality
• Suitable for cold conditions and outdoor heavy duty tasks
• Black latex crinkle finish on warm acrylic liner with elasticated knitwrist for secure fit
• Applications: Construction, Transportation, Refuse collection, Maintenance, Local authority.
• Material: Acyrlic / Latex

Perfect for intricate tasks where dexterity and breath-ability are essential.
Fabric: Nylon, PU
Colour: Black

Standards: EN420, EN388
Perfect for intricate tasks where dexterity and breath-ability are essential.
Fabric: Nylon, PU
Colour: Black

Single Head Tripod For Hexagon Site Lights

Double Head Tripod For Hexagon Site Lights

All lined up: The battery-powered GSH 18-20 Battery 2-in-1 grass & shrub shears cut lawn edges with precision and trim shrubs into elegant shapes. For precision cutting results.
This product does not include a battery or charger.

Just a few hand movements is all it takes to install the lawn mower blade made from high-grade steel in the LMO 18-33 Battery. With a cutting width of 33 cm it achieves neat cutting results.

The lawn mower blade with a cutting width of 36 cm is suitable for use in the battery-powered LMO 18-36 Battery, thus ensuring excellent cutting results.

British Rail, Network Rail, Rail

SOCKET, IMPACT, BI-SQUARE, 1-1/8" X 1" DRIVE, AS CHAIR SCREW

50mm pin
500mm ring suits this socket

The Karcher Xpert range are robust, reliable Karcher professional pressure washers specially designed for the rigours of trade & construction use.

The Xpert OneTen HD 7125 features tough components throughout, including a brass cylinder head & water inlet, 10m heavy duty wire-braided antikink hose & stainless steel pistoms & spray lance.

Thanks to its 1.4kW motor, the Xpert OneTen provides a max pressure output of 110 bar, enabling you to quickly & easily blast dirt away from the cleaning surface. The detergent intake hose also allows you to apply chemical through the machine, helping to remove any stubborn / ingrained dirt.

The Karcher Xpert range now features the EASY!Force tigger gun, giving you the power to use the high pressure output with ease.

The revolutionary operating concept of the EASY!Force trigger gun uses the recoil force of the high pressure jet & reduces the holding force for the trigger to zero, ensuring more effortless, ergonomic & stress-free use.

In addition the Xpert OneTen also features Karcher’s patented EASY!Lock quick locks, meaning connection is quick and easy, 5 times faster compared with conventional screw connections whilst remaining just as durable & robust. The Xpert OneTen will also feature a stainless steel spray lance, EASY!Force trigger gun & triple nozzle.

SIZE 10 LARGE

BLACK, GREY & YELLOW

VELCRO WRIST BAND

CUT LEVEL 5 (D) & IMPACT RESISTANT GLOVES

SIZE 9 MEDIUM

BLACK, GREY & YELLOW

VELCRO WRIST BAND

CUT LEVEL 5 (D) & IMPACT RESISTANT GLOVES

SIZE 11 X-LARGE

BLACK, GREY & YELLOW

VELCRO WRIST BAND

CUT LEVEL 5 (D) & IMPACT RESISTANT GLOVES

SIZE 9 MEDIUM

ORANGE & BLACK

CUT LEVEL 5 THERMAL WINTER

SIZE 10 LARGE

ORANGE & BLACK

CUT LEVEL 5 THERMAL WINTER

SIZE 11 X-LARGE

ORANGE & BLACK

CUT LEVEL 5 THERMAL WINTER

Data Sheet

DATA SHEET

DATA SHEET

E Clip Replacement Hook 0039/42743

• Jerry Can Flexible Pouring Spout (Green)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

Jerry Can Flexible Pouring Spout (Red)
Optimum flow is assured when using our spouts with our cans
Special breathing channel provide steady, glug-free pouring
Each spout has an internal filter to protect charging tank from dirt and foreign bodies
Suitable for 5L, 10L and 20L Jerry Cans
Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

• Jerry Can Flexible Pouring Spout (Yellow)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

Insulation Tape 19mm x 20m (Black)
Professional grade PVC electrical insulation tape
BS EN 60454
RoHS Compliant

Anti-Slip Tape - Black (24mm x 5m). Reduces the Risk of Accidents On Slippery, Uneven or Split-Level Floor Surfaces. High Quality Abrasive on PVC Carrier with an Aggressive Solvent-Based Adhesive. Quick and Easy to Apply.

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

Black Cable Ties (Pack of 100)
Available in Various Sizes:
100mm x 2.5mm
120mm x 4.8mm
140mm x 3.6mm
160mm x 2.5mm
160mm x 4.8mm
200mm x 2.5mm
200mm x 3.6mm
200mm x 4.8mm
250mm x 4.8mm
300mm x 3.6mm
300mm x 4.8mm
300mm x 7.6mm
370mm x 4.8mm
370mm x 7.6mm
430mm x 4.8mm
430mm x 9mm
450mm x 7.6mm
480mm x 13mm
530mm x 9mm
540mm x 7.6mm
580mm x 13mm
710mm x 9mm
780mm x 9mm

PAN PULLER, E PLUS, HOOKS CASE HARDENED TO 45-50 HRc PAINTED BLACK 0039/042742

Black Paint Line Marker 750ml

Safety Data Sheet -

The 20 Litre Red Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
• Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

The 10 Litre Green Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:
● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

The 10 Litre Red Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:
● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Single Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

The 10 Litre Yellow Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:
● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

The 20 Litre Green Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
•  Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

THINSULATED HAT BEANIE STYLE BLACK HAT

BLACK THERMAL KNITTED SOCKS 1 PAIR

THERMAL LONG JOHNS BLACK SIZE MEDIUM

BLACK BEANIE HAT WITH 150 LUMEN QUAD SAMSUNG SMD LED USB RECHARGEABLE LIGHT - 3.7v 420mAh LI-POLYMER BATTERY

• Jerry Can Flexible Pouring Spout (Black)
• Optimum flow is assured when using our spouts with our cans
• Special breathing channel provide steady, glug-free pouring
• Each spout has an internal filter to protect charging tank from dirt and foreign bodies 
• Suitable for 5L, 10L and 20L Jerry Cans
• Includes an attachable clip for mounting the spout onto 10L and 20L Cans when not in use

The 20 Litre Black Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

• Rust Resistant Paint
• Interior Rezinol Lining
•  Leak Proof Bayonet Cap
• High Strength Triple Handle
• Weighs 4.3kg
• 470mm H x 345mm L x 165mm W
• D Approved & Certified UN Dangerous Goods Approval
• Australian Standard: AS 2906
• Sweden Standard SP
• German Standard TÜV/GS

The 10 Litre Black Jerry Can is our most compact of the range. Our fuel cans are built to the highest quality, with a number of unique features.

Features Include:

● Rust Resistant Paint
● Interior Rezinol Lining
● Leak Proof Bayonet Cap
● High Strength Triple Handle
● Weighs 3kg
● 275mm H x 345mm L x 165mm W

The NATO style Jerry Can has a robust construction and a corrosion resistant lining. This Jerry Can holds upto 10 Litres of fuel or liquid and has a yellow finish which is ideal in areas where high visibility is needed.

Jerry Can Rigid Pouring Spout Black

SPARE SCREW TOP AND SEAL FOR JERRY CANS