3-IN-ONE’s original drip oil lubricates, cleans and prevents rust. Its precise, easy-to-use drip spout enables precise lubrication, with no overspray or splatter. It can be used on in-line skates, tools, bicycles, wheels, fans and moving parts

Catalogue No; Reference: 0039/42748 PANDROL No. LP1180. And for 4 shoulder baseplates. All STEL hand-tools can be supplied with optional insulated handles, which have recently been upgraded to 32 mm diameter cylindrical straight handles, Instructions for PANPULLER LP1180 ​• Insert center leg of clip into housing. • Place pivoted hook over the inside of the front arch of clip with foot of PANPULLER behind clip housing and ensure lip of the hook is under the front arch. • Taking up a natural stance with feet apart, move one leg half a pace back to prevent loss of balance. Stand behind the PANPULLER, with both hands on tee handle at top of PANPULLER, pull strongly towards chest until refusal. • The PANPULLER automatically pulls clip to the correct position Extraction Instructions Reverse the PANPULLER • Taking up a natural stance (feet apart, move one leg half a pace back to prevent loss of balance) on the same side as for installation, place hook on the outside of the front arch of the clip, the foot of the PANPULLER resting on the baseplate/housing just above the centre leg of clip (as illustrated). • Standing behind PANPULLER with both hands on the tee handle at the top of PANPULLER, give a strong firm push away from your chest. • If clips have been in situ for many years, it may be necessary to use a hammer to loosen them taking safety precautions. If the clips will not move then use the Rusty Clip Extractor can be used for PR clips. NOTE. It is mandatory to wear eye protection when removing or fitting any clips where hammer assistance might be necessary.

DATA SHEET

ATEX - 150 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 3M SUB. FLASHLIGHT 4 x AA (NOT INC)

DATA SHEET

ATEX - 350 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE RIGHT ANGLE TORCH IP54 4 x AA (NOT INC)

DATA SHEET

ATEX - 225 LUMEN CREE LED ZONE 0 INTRINSICALLY SAFE IP67 1m SUB. HEADLIGHT 3 x AAA (NOT INC)

DATA SHEET

Clean hands anywhere ✓ 65% Alcohol Gel ✓ Anti-Bacterial ✓ Vegan Friendly ✓ Dermatologically Tested ✓ Only Tested on Humans ✓ Made in England Apply a small amount to the palm of the hand and message thoroughly into the hands until they dry. Ensure that all parts have been thoroughly covered, particularly the cuticles, fingertips and between the fingers. For External Use Only. Do not apply to broken skin. Avoid contact with fabrics and eyes. ■ If contact with eyes occurs rinse with clean water. "Frequent use disinfects hands and helps prevent cross contamination."

Please Call For Parts List 0114 383 0110 or Email sales@specialisedtools.co.uk 

OUTPUT: 3.4kVA / 2.7kW
SOCKETS: 1 x 16a 115v / 1 x 32a 115v / 2 x 16a 230v
ENGINE: Honda GX200
HP/CYLINDERS: 6.5 / 1
START: Recoil
FUEL TANK: 3.1 Litres
RUN TIME: 2.5 Hours
NOISE LEVEL: 71dBA @ 7 metres
DIMENSIONS: L610 x W420 x H415mm
WEIGHT: 36 KG
OPTIONS: Single voltage, LPG conversion, Long run tank (metal), Trolley kit.

Loncin LC2000i 110V inverter generator is the perfect machine when 110V is a requirement, it's lightweight, reliable and powerful.
Low emissions with a low noise level of 61 dBA @7m Delivers spike free poier for sensative appliances 7hrs run time.
Compact and lightweight at only 21KG Run machines in parallel for additional power 1.6kW rated power output FEATURES & BENEFITS Engine single cylinder, 4 stroke, forced cooling OHV (LC148F) Fuel Capacity 4.2 ltr Displacement 79 cc Starting System Recoil Running Time 7 hrs Rated Voltage 230 volt Noise (≤ 7m 61dBA Dimensions (L x W x H mm) 499 x 285 x 455 mm Net Weight 21 kg Rated output hp / kW 2.1 / 1.6

Please Call For Parts List 0114 383 0110 or Email sales@specialisedtools.co.uk

Product Code: 0039/047851 Previously LP18679 Suitable for extracting FASTCLIP FC, FASTCLIP FE, VIPA-SP and SFC fastenings. The new tools, which react from the rail, are more efficient, faster and safer because they are not prone to slipping from the shoulder reaction points. Additionally, the tools offer compatibility with a wide range of Pandrol systems, including FASTCLIP ‘FC’ & FASTCLIP ‘FE’ and the Pandrol baseplate types VIPA-SP & SFC baseplate. Instructions for Extractor AE17385 The Extractor tool acts as a lever against the web of the rail and the toe of the clip. To locate the tool hold at angle away from the rail and move forwards to position the tool between the rail and the shoulder, with the rear clip catching frame towards the operators foot. Once located grasp both handles of the ‘Tee’ bar, and stand ‘naturally’ with feet apart then move one leg half a pace back, to prevent loss of balance during clip extraction. Push the handles away until the rear of the clip touches the catching frame, to ensure the clip remains in the shoulder, to locate in the ‘Parked’ position. Care should be taken to maintain the operator’s balance during clip extraction as the handle is pushed away. To remove the clip completely from the shoulder, keep pushing the handle so the frame hinges upwards and the clip is removed from the shoulder.